journal article·2025-04

Influence of CMT welding parameters on microstructural and properties investigation of dissimilar weld joint for aluminum bronze and carbon steel

Mahadevan G, Senthilkumar Tamilkolundhu, Francis Xavier Josephraj, Ramasamy N

Materials Science and Technology· Volume 41· Issue 6
Publisher page

Abstract

Cold Metal Transfer (CMT) welding technology has improved the appearance of weld beads and revolutionized the welding of thicker materials and dissimilar metals with precise metal deposition and reduced heat input. Cold Metal Transfer welding is predominantly used in a variety of industry applications, including aerospace, shipbuilding, automotive and marine industries. In this study, aluminum bronzes and carbon steel were joined by using CMT welding, a variant of the Gas Metal Arc Welding process, with ERCuAl-A2 as the filler metal. Optical microscopy was used to examine the microstructure of the CMT weld joint between aluminum bronze and carbon steel. Results have indicated that dissimilar metals such as aluminum bronze, and carbon steel could be successfully joined by CMT under various processing parameters. The tensile and bending strengths of the dissimilar joint were 490 MPa and 822 MPa, respectively. A variety of intermetallic compounds and solid solutions were generated in the weld zone and fusion zone. The micro-hardness in the carbon steel side of the fusion zones increased sharply, which was 164 HV in the welded condition. The dissimilar joint was stronger than the carbon steel, as the ductile fracture occurred on the carbon steel during the transverse tensile test of the welded specimen. The microstructure interpretation of welded dissimilar joints was analyzed by scanning electron microscopy and transmission electron microscopy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Science · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, University College of Engineering, BIT campus, Anna University, Tiruchirappalli, Tamilnadu, India

Department of Mechanical Engineering, Jeppiaar Engineering College, Chennai, Tamilnadu, India

Centre for sustainable materials and surface metamorphosis, Chennai Institute of Technology, Chennai, Tamilnadu, India

References (37)

Show source-provided references
1. 10.1016/j.compstruct.2022.11549010.1016/j.compstruct.2022.115490 ↗
2. 10.1088/1757-899X/884/1/01211510.1088/1757-899X/884/1/012115 ↗
3. 10.1016/j.jmatprotec.2019.04.01810.1016/j.jmatprotec.2019.04.018 ↗
4. 10.3390/met1109148610.3390/met11091486 ↗
5. 10.1016/j.jmatprotec.2010.11.00510.1016/j.jmatprotec.2010.11.005 ↗
6. 10.1016/j.matpr.2019.07.33110.1016/j.matpr.2019.07.331 ↗
7. 10.1007/s11665-023-08940-z10.1007/s11665-023-08940-z ↗
8. 10.1016/j.matdes.2008.07.01510.1016/j.matdes.2008.07.015 ↗
9. 10.1179/174329306X12088610.1179/174329306X120886 ↗
10. 10.1016/j.dt.2017.08.00210.1016/j.dt.2017.08.002 ↗
11. 10.1016/j.jer.2023.12.00910.1016/j.jer.2023.12.009 ↗
12. 10.1016/j.optlastec.2020.10658910.1016/j.optlastec.2020.106589 ↗
13. Jie H, Chen T, Huang F, et al. Study on the effect of pulse waveform parameters on droplet transition, dynamic behavior of weld pool, and weld microstructure in P-GMAW. Metals 2023: 13–199.
14. Nalajam P, Arungalai Vendan S, Shanmugam N. Investigations on the parametric effects of cold metal transfer process on the microstructural aspects in AA6061. J Alloys Compd 2015; 658: 255–264.
15. 10.1016/j.jmatprotec.2018.02.02910.1016/j.jmatprotec.2018.02.029 ↗
16. 10.1016/j.matpr.2020.09.45610.1016/j.matpr.2020.09.456 ↗
17. 10.1177/0954406222113994710.1177/09544062221139947 ↗
18. 10.1007/s11665-020-04749-210.1007/s11665-020-04749-2 ↗
19. 10.1007/s40544-018-0221-y10.1007/s40544-018-0221-y ↗
20. 10.1002/maco.20221332810.1002/maco.202213328 ↗
21. Chalasani D, Mohammadi M. Chapter fifteen – prospects of additively manufactured nickel aluminum bronzes for marine applications in (eds Kadkhodapour, J., Schmauder, S. & Sajadi. F.). Qual Anal Addit Manuf Met (Elsevier) 2023: 627–687.
22. 10.1016/B978-0-08-097123-0.00018-610.1016/B978-0-08-097123-0.00018-6 ↗
23. Zhang XM, et al. IOP Conf. Ser. Mater Sci Eng 2018; 436: 012019.
24. 10.1016/j.jmatprotec.2016.07.04110.1016/j.jmatprotec.2016.07.041 ↗
25. 10.1016/S1875-5372(16)30080-710.1016/S1875-5372(16)30080-7 ↗
26. Fan D Li Y Wu L et al. Effect of Ultrasonic Vibration on Microstructure and Mechanical Properties of Welding-Brazing Joint Between Aluminum and Copper by Plasma Welding. 2021. DOI https://doi.org/10.11896/cldb.20070177
27. 10.24425/amm.2019.12759910.24425/amm.2019.127599 ↗
28. 10.3390/ma1208135810.3390/ma12081358 ↗
29. Raja B, Palanikumar VK, Sathish Kannan K, et al. Influence of welding parameters on mechanical and corrosion properties of Ti6Al4 V alloy. Mater Today Proc 2023. https://doi.org/10.1016/j.matpr.2023.06.001
30. 10.1016/j.jmrt.2019.01.01010.1016/j.jmrt.2019.01.010 ↗
31. 10.1016/j.matdes.2021.10987310.1016/j.matdes.2021.109873 ↗
32. 10.17222/mit.2022.41110.17222/mit.2022.411 ↗
33. Ochi H, Isshiki Y, Kawai G. Fatigue strength of friction-welded joints of aluminum bronze to carbon steel1. Strength Fract Complex 2020; 13: 1–10.
34. 10.3390/ma1319431010.3390/ma13194310 ↗
35. 10.1016/j.ijhydene.2020.01.14610.1016/j.ijhydene.2020.01.146 ↗
36. 10.1016/j.heliyon.2023.e1895910.1016/j.heliyon.2023.e18959 ↗
37. 10.1590/1980-5373-mr-2017-060310.1590/1980-5373-mr-2017-0603 ↗