journal article·2024-11Open access

Manufacturing profiled conical cylinder by a semi-closed isothermal precision die forging technology

Dengliang Tong, Youping Yi, Hailin He, Shiquan Huang, Jiaguo Tang

Materials Science and Technology· Volume 40· Issue 16

Abstract

An improved semi-closed isothermal precision dies forging process has been used to produce successfully precision profiled conical cylinder forging. The semi-closed die forging significantly improved the forming quality and deformation homogeneity of profiled forgings, and greatly reduced die forging force by isothermal forging with three-stage variable speed. The static recrystallization during solution process was inhibited, and fine and even dynamic recrystallized grains and abundant sub-grains were obtained. In addition, the difference of the microstructure at each position was small and the distribution of grains and second phase particles was uniform. This significantly improved the mechanical properties and homogeneity of forgings, and the average values of tensile strength, yield strength and elongation reached 480.9 MPa, 387.8 MPa and 8.75%, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Light Alloy Research Institute, Central South University, Changsha, China

State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Changsha, China

School of Mechanical and Electrical Engineering, Central South University, Changsha, China

Funding

the Major Projects of Scientific and Technology Innovation of Hunan Province · the Joint Funds of the National Natural Science Foundation of China

References (28)

Show source-provided references
1. 10.1016/j.compositesa.2021.10676210.1016/j.compositesa.2021.106762 ↗
2. 10.1016/j.matpr.2021.06.27610.1016/j.matpr.2021.06.276 ↗
3. 10.1016/j.paerosci.2018.01.00110.1016/j.paerosci.2018.01.001 ↗
4. 10.1016/j.matpr.2021.09.49810.1016/j.matpr.2021.09.498 ↗
5. 10.1016/j.dibe.2023.10031910.1016/j.dibe.2023.100319 ↗
6. 10.1016/j.msea.2018.12.05110.1016/j.msea.2018.12.051 ↗
7. 10.1016/j.jmrt.2023.09.27410.1016/j.jmrt.2023.09.274 ↗
8. 10.1016/j.jallcom.2020.15544210.1016/j.jallcom.2020.155442 ↗
9. 10.1016/j.mtcomm.2023.10548010.1016/j.mtcomm.2023.105480 ↗
10. 10.1016/j.proeng.2017.10.79210.1016/j.proeng.2017.10.792 ↗
11. 10.1016/j.jmatprotec.2021.11727710.1016/j.jmatprotec.2021.117277 ↗
12. 10.1016/j.msea.2014.11.04410.1016/j.msea.2014.11.044 ↗
13. 10.1016/j.msea.2013.09.04010.1016/j.msea.2013.09.040 ↗
14. 10.1016/j.jallcom.2020.15626410.1016/j.jallcom.2020.156264 ↗
15. 10.1016/j.jallcom.2020.15544210.1016/j.jallcom.2020.155442 ↗
16. 10.1016/j.msea.2019.13836610.1016/j.msea.2019.138366 ↗
17. 10.1016/j.jmrt.2023.01.02910.1016/j.jmrt.2023.01.029 ↗
18. 10.1016/j.jmrt.2021.04.02510.1016/j.jmrt.2021.04.025 ↗
19. 10.1016/j.cma.2005.03.01310.1016/j.cma.2005.03.013 ↗
20. 10.4028/www.scientific.net/KEM.822.13710.4028/www.scientific.net/KEM.822.137 ↗
21. 10.1016/j.promfg.2019.12.07710.1016/j.promfg.2019.12.077 ↗
22. 10.1007/s11661-016-3576-610.1007/s11661-016-3576-6 ↗
23. 10.1016/j.actamat.2023.11873510.1016/j.actamat.2023.118735 ↗
24. 10.1016/j.ijimpeng.2022.10439710.1016/j.ijimpeng.2022.104397 ↗
25. 10.1016/j.msea.2016.07.07210.1016/j.msea.2016.07.072 ↗
26. 10.1016/j.matchar.2021.11149210.1016/j.matchar.2021.111492 ↗
27. 10.1016/j.jallcom.2021.15945910.1016/j.jallcom.2021.159459 ↗
28. 10.1016/j.jmst.2018.09.00710.1016/j.jmst.2018.09.007 ↗