Dependence of creep crack propagation on columnar grain orientation in cast HK40 tube
Source abstract
Abstract
Compact tension specimens having a columnar grain orientation inclined to the notch plane at an angle θ in the range 0–60° were prepared from a centrifugally cast HK40 tube. Constant load creep crack propagation tests were carried out on these specimens at 871°C. It wasfound that the creep cracks tended to advance along the columnar grain boundaries, and the crack propagation resistance increased with increasing θ. The dependence of creep crack propagation rate da/dt on the columnar grain orientation can be expressed as da/dt=A[KIcos2(θ/2)]m, where A and m are constants and KI is the stress intensity factor. A good correlation between the creep crack propagation rate and the path independent integral C* confirms that the integral C* is an appropriate controlling factor for creep crack propagation in cast HK40 alloy.MST/3244
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. 10.1007/BF0266483110.1007/BF02664831 ↗
2. 1986 · 30 · 27
3. 10.1007/BF0001261910.1007/BF00012619 ↗
4. 1992 · 10 · 25110.1080/09603409.1992.11689426 ↗
5. 1990 · 6 · 119310.1179/026708390790189894 ↗
6. 10.1007/BF0264788510.1007/BF02647885 ↗
7. 1978 · 7 · 152
8. 1982 · 21 · 165
9. 1977 · 17 · 28