Wettability evaluation of fibres based on force measurements
Source abstract
Abstract
The paper provides a new method to evaluate the wettability of fibers based on force analysis.The fiber in horizontal was forced into and withdrew from the liquid during which the force changes were detected.The force changes for the fibers are different with different wettability.There are four typical force changes for the fibres.The wettability factor was put forward to evaluate the difference of the wettabilty of the fibres.The wettabilty of the fibers can be evaluated with the wettability factor w,derived from the fiber immerging curve(w=FAB/FCD),and calculated from the wettability factor(θ=π/(w+1)) with the contact angle θ,when the fiber is a circular cross-section.This method can be used for various fibers with short length,or lower density than that of the liquid,or poor wettability.The fineness of the fiber is the important factor affecting the force changes but little influences the wettability.The shape of the cross section of the fiber is also an evident effect on the wettability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Textile materials and evaluations · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.