journal article·2001-02

Numerical analysis of effect of material and processing parameters on thickness distribution during superplastic die bulging of cavity sensitive materials

Xiang Y.-B., Chen D.-J., Wu S.-C.

Materials Science and Technology· Volume 17· Issue 2
Publisher page

Abstract

The superplastic bulging of circular sheets clamped against axisymmetrical cylindrical dies has been analysed numerically by means of a rigid–viscoplastic finite element method, in which four node quadrilateral isoparametric elements are used with a Newton–Raphson non­linear solution scheme. Both effects of normal anisotropy and strain hardening in the material are considered and a modified Coulomb friction law is adopted. At the same time, the yield criterion suited for the superplastic forming process and the cavity damage evolution model deduced from continuum damage mechanics are applied to a finite element formulation. The influences of material parameters (the strain rate sensitivity exponent m, the strain hardening exponent n, the coefficient of normal anisotropy R) and processing parameters (pressure cycle, lubrication condition, die geometry) on the inhomogeneity of the thickness distribution are studied and discussed. A selection of the simulated results is compared with the experimental results, with good agreement.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. S. WU: `Superplastic deformation theory of metals': 1997, Beijing, National Defense Industry Press (in Chinese).
2. 10.1016/0025-5416(86)90228-410.1016/0025-5416(86)90228-4 ↗
3. 10.1016/0045-7825(84)90130-010.1016/0045-7825(84)90130-0 ↗
4. 10.1002/nme.162030082310.1002/nme.1620300823 ↗
5. 10.1007/BF0264930910.1007/BF02649309 ↗
6. S. C. RAMA, N. CHANDRA, and R. E. GOFORTH: in 'Advances in superplasticity and superplastic forming', (ed. N. Chandra et al.), 133–154; 1993, Warrendale, PA, TMS.
7. 10.1016/0924-0136(95)02223-610.1016/0924-0136(95)02223-6 ↗
8. LI Y. X. · Acta. Mech. Solida. Sin · 1993 · 6 · 131
9. R. HILL: 'Mathematical theory of plasticity': 1950, Oxford, Oxford University Press.
10. 10.1007/BF0001598910.1007/BF00015989 ↗
11. 10.1007/BF0012230710.1007/BF00122307 ↗
12. 10.1016/0924-0136(94)01613-610.1016/0924-0136(94)01613-6 ↗