journal article·2023-08

The analysis of hot deformation behaviour of low-cost α+β Ti-6Al-0.4V-1.2Fe alloys

Guilin Wan, Zhihao Ren, Yanhua Guo, Zhonggang Sun, Hui Chang

Materials Science and Technology· Volume 39· Issue 12
Publisher page

Abstract

The low-cost Ti-6Al-0.4V-1.2Fe alloy was subjected to isothermal compression experiments on the Gleeble 3800, and the deformation temperature was 775°C∼975°C and the strain rate was 0.01 s −1 ∼10 s −1 . Based on the experimental data on thermal deformation, the microstructure evolution was studied and the constitutive equation was developed. The experimental results show that the flow stress increased with increasing deformation temperature and with the increase of the strain rate; the optimal deformation temperature of Ti-6Al-0.4V-1.2Fe alloy is 820°C∼950°C, and the strain rate is 0.01 s −1 ∼0.32 s −1 ; During hot deformation, the primary softening mechanism of this alloy is continuous dynamic recrystallisation. Compared with Ti-6Al-4V, the Ti-6Al-0.4V-1.2Fe alloy has better hot workability and better plasticity. Highlights A newly low-cost Ti-6Al-0.4V-1.2Fe alloy was designed based on the K β stability coefficient method, and the β stability coefficient was the same as that of Ti-6Al-4V. A study on the microstructure evolution in the process of hot deformation between Ti-6Al-0.4V-1.2Fe and Ti-6Al-4V alloys. A study on microstructure evolution and hot working process of a newly low-cost Ti-6Al-0.4V-1.2Fe alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Materials Science and Engineering, Nanjing Tech University, Nanjing, People's Republic of China

Funding

National Key Research and Development Program of China · National Natural Science Foundation of China · Taizhou Science and Technology Project · Aeronautical Science Foundation of China

References (54)

Show source-provided references
1. 10.1016/j.measurement.2014.10.05910.1016/j.measurement.2014.10.059 ↗
2. 10.1016/j.matpr.2022.01.00810.1016/j.matpr.2022.01.008 ↗
3. Kumar R · Mater Today Proc · 2022 · 50 · 649
4. 10.1016/j.matdes.2010.09.01110.1016/j.matdes.2010.09.011 ↗
5. 10.1016/j.matpr.2020.07.35710.1016/j.matpr.2020.07.357 ↗
6. 10.1016/j.jmrt.2020.08.03410.1016/j.jmrt.2020.08.034 ↗
7. 10.1016/j.jallcom.2017.05.09710.1016/j.jallcom.2017.05.097 ↗
8. 10.1016/j.msea.2020.13962210.1016/j.msea.2020.139622 ↗
9. Huang H. · Foundry Technol · 2015 · 36 · 71
10. 10.1016/j.msea.2012.08.03910.1016/j.msea.2012.08.039 ↗
11. Mobab C · Mater Today Proc · 2021 · 38 · 564
12. 10.1016/j.scriptamat.2018.08.00510.1016/j.scriptamat.2018.08.005 ↗
13. Fa N Y · Jinshu Rechuli/Heat Treat Met · 2013 · 38 · 21
14. 10.1016/j.jmst.2021.04.06310.1016/j.jmst.2021.04.063 ↗
15. 10.1016/j.jmrt.2021.09.00910.1016/j.jmrt.2021.09.009 ↗
16. Zhu X · Rare Met Mater Eng · 2017 · 46 · 204
17. 10.1016/j.msea.2021.14187710.1016/j.msea.2021.141877 ↗
18. 10.1557/jmr.2018.33110.1557/jmr.2018.331 ↗
19. Akma B · J Alloys Compd · 2021 · 894 · 162453
20. Ke W · Metals · 1630 · 11 · 2021
21. 10.1016/j.matchar.2020.11085510.1016/j.matchar.2020.110855 ↗
22. Fang H · Front Mater · 2044 · 14 · 2022
23. 10.1016/j.scriptamat.2021.11422910.1016/j.scriptamat.2021.114229 ↗
24. Fang H · Materials · 2024 · 14 · 2021
25. 10.1016/j.promfg.2020.08.09810.1016/j.promfg.2020.08.098 ↗
26. 10.1016/j.jallcom.2016.09.01210.1016/j.jallcom.2016.09.012 ↗
27. 10.1088/2053-1591/ab494110.1088/2053-1591/ab4941 ↗
28. 10.3390/met1105078910.3390/met11050789 ↗
29. An Z · High Temp Mater Process · 2015 · 49 · 945
30. 10.1016/j.msea.2011.01.11310.1016/j.msea.2011.01.113 ↗
31. 10.1016/S0921-5093(01)01982-710.1016/S0921-5093(01)01982-7 ↗
32. 10.1179/1432891714Z.00000000067710.1179/1432891714Z.000000000677 ↗
33. 10.3390/ma1109159910.3390/ma11091599 ↗
34. 10.3390/met708031910.3390/met7080319 ↗
35. 10.1016/S1003-6326(16)64234-610.1016/S1003-6326(16)64234-6 ↗
36. 10.1016/j.cja.2020.07.03610.1016/j.cja.2020.07.036 ↗
37. 10.1016/j.matdes.2010.11.04810.1016/j.matdes.2010.11.048 ↗
38. 10.1016/j.promfg.2020.08.09810.1016/j.promfg.2020.08.098 ↗
39. 10.1016/j.jmrt.2022.08.04410.1016/j.jmrt.2022.08.044 ↗
40. 10.1002/srin.20200022510.1002/srin.202000225 ↗
41. Nayak S · Adv Mater Process Technol · 2020 · 6 · 224
42. 10.1016/j.matdes.2010.11.00410.1016/j.matdes.2010.11.004 ↗
43. 10.1007/s11665-014-1243-x10.1007/s11665-014-1243-x ↗
44. 10.1016/j.cja.2021.01.00210.1016/j.cja.2021.01.002 ↗
45. 10.1016/j.jmrt.2019.12.09310.1016/j.jmrt.2019.12.093 ↗
46. 10.3390/ma1408202110.3390/ma14082021 ↗
47. 10.1016/j.msea.2020.13969210.1016/j.msea.2020.139692 ↗
48. 10.1016/j.msea.2014.06.03010.1016/j.msea.2014.06.030 ↗
49. 10.1016/j.jallcom.2017.02.28510.1016/j.jallcom.2017.02.285 ↗
50. 10.1016/j.msea.2014.05.01410.1016/j.msea.2014.05.014 ↗
51. 10.1016/j.jmst.2019.07.05210.1016/j.jmst.2019.07.052 ↗
52. 10.1016/j.pnsc.2020.01.00410.1016/j.pnsc.2020.01.004 ↗
53. 10.1007/s12598-020-01643-710.1007/s12598-020-01643-7 ↗
54. 10.1016/j.matchar.2019.03.00510.1016/j.matchar.2019.03.005 ↗