journal article·2020-12

Effect of solution treatment on micropore and mechanical properties of DD6 superalloy

Maodong Kang, Jun Wang, Wei Xiong, Soumya Sridar, Junwei Yu

Materials Science and Technology· Volume 36· Issue 18
Publisher page

Abstract

Effect of solution treatment on the micropore and mechanical properties is investigated for the DD6 superalloy. The results show that solution treatment has positive and negative effects on the DD6 superalloy, which can weaken the segregation significantly. After solution treatment, the segregation ratio of the major alloying elements tends to 1. However, the amount of micropores increases with increasing solutionising time and can reach 0.46%, which is one order of magnitude higher than that of the as-cast superalloy. The hardness increases slightly, especially for the superalloy solutionised at 1310°C with a 5% increase in hardness compared to the as-cast superalloy. Hardness, tensile and stress rupture properties of the DD6 superalloy can reach the best after solution treatment at 1310°C and 4 h.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming, Shanghai Jiao Tong University, Shanghai, People's Republic of China

School of Materials Science and Engineering, Shanghai Jiao tong University, Shanghai, People's Republic of China

State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai, People's Republic of China

Physical Metallurgy and Materials Design Laboratory, Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA, USA

Funding

National Natural Science Foundation of China · Youngman Research at SJTU · Aeronautical Science Foundation of China · China Scholarship Council

References (23)

Show source-provided references
1. 10.1017/CBO9780511541285.00510.1017/CBO9780511541285.005 ↗
2. 10.1088/1361-651X/ab203110.1088/1361-651X/ab2031 ↗
3. Campbell J · Metall Mater Trans B · 2012 · 43 · 110.1007/s11663-012-9655-1 ↗
4. 10.1016/j.actamat.2016.07.00810.1016/j.actamat.2016.07.008 ↗
5. 10.1016/S0921-5093(00)01776-710.1016/S0921-5093(00)01776-7 ↗
6. 10.1007/s11837-004-0200-910.1007/s11837-004-0200-9 ↗
7. 10.1007/s11661-012-1146-010.1007/s11661-012-1146-0 ↗
8. 10.1016/j.ijfatigue.2018.05.00310.1016/j.ijfatigue.2018.05.003 ↗
9. 10.1016/j.msea.2015.12.05410.1016/j.msea.2015.12.054 ↗
10. 10.1016/j.scriptamat.2007.07.01210.1016/j.scriptamat.2007.07.012 ↗
11. Li J, Zhong Z, Tang D . A low-cost second generation single crystal superalloy DD6. Superalloys 2000, Edited by T.M. Pollock, R.D. Kissinger, R.R. Bowman,K.A.G reenM, McLean, S. Olson, and J.J. Schina.TMS( The Minerals Metals & Materials society), 2000, 777–783.10.7449/2000/Superalloys_2000_777_783 ↗
12. Li J · Superalloys · 2008 · 443
13. 10.1016/0364-5916(85)90021-510.1016/0364-5916(85)90021-5 ↗
14. 10.1023/B:JMSC.0000048736.86794.1210.1023/B:JMSC.0000048736.86794.12 ↗
15. 10.1016/j.matchar.2017.08.01210.1016/j.matchar.2017.08.012 ↗
16. 10.1007/s11665-020-04813-x10.1007/s11665-020-04813-x ↗
17. 10.1007/s11837-003-0158-z10.1007/s11837-003-0158-z ↗
18. Zhe W · Hot Working Tech(Chinese) · 2017 · 46 · 217
19. 10.1179/1743284712Y.000000009010.1179/1743284712Y.0000000090 ↗
20. 10.1134/S003602950801011410.1134/S0036029508010114 ↗
21. 10.1134/S207511331601005610.1134/S2075113316010056 ↗
22. 10.1051/matecconf/2014140100110.1051/matecconf/20141401001 ↗
23. 10.1007/s11661-001-0032-y10.1007/s11661-001-0032-y ↗