article·2015-01-01

Influence of SiC content on the microstructures and mechnical properties of SiCw/Cu composites

Cai Xushen

Abstract

In order to investigate the formation mechanism of SiCw / Cu composites,further study the influence of Si C content to the microstructure,mechanical properties of SiCw / Cu composites,SiCw / Cu composites were prepared by hot pressing sintering( HP) and hot isostatic pressing sintering( HIP). Their densities,porosities,microstructures,Vickers hardness,tensile strengths( σts),tensile yield strengths( σtys) and compression yield strengths( σcys) were investigated. The micrograph of tensile fracture was analyzed by SEM( Scanning Electron Microscope). The results showed that Cu grains of composites remain original powder particle size order of magnitude after HP / HIP because the growth of Cu grain was hindered by SiCw. The densities of composites and its percentage elongation after fracture were decreased with increasing of SiCw. But their porosities,micro-hardness and compressive yield strengths were highly increased with increasing of SiCw. The 1wt%SiCw / Cu composite has the optimum mechanical property: σtswas σtyswas 112.5 MPa. All aspects of performances of HIP composites were superior to HP composites: σtswas 175.6 MPa,σtyswas 123.2 MPa,and Vickers hardness was 101.8 in 3wt%SiCw /Cu composite. The curve of the tensile strengths vs. the content of SiCw for HP composite has a peak because the strength of the composite was affected by the SiCw reinforcing effect and the pore weakening effect. Fracture behavior of SiCw / Cu composites showed both toughness characteristic,and some brittle characteristics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.