journal article·1993-07

Effect of hot isostatic pressing on mechanical properties and microstructure of 70–30 cupronickel castings

A. J. Fletcher, S. King, B. Rickinson, H. Atkinson

Publisher page

Abstract

The present work is part of an investigation into the use of hot isostatic pressing to recover 70–30 cupronickel castings. These alloys have particularly good corrosion resistance and, when strengthened with silicon and chromium, produce a material capable of use in very severe conditions of stress and massive corrosion. However, it is not possible to recover such castings by the application of repair welding, because of the possibility of reduced corrosion resistance in the vicinity of the weld. Hot isostatic pressing represents an alternative method of casting recovery. The results reported in the present work refer to the effect of hot isostatic pressing on mechanical properties, microstructure, and the level of segregation in the alloys. Hot isostatic pressing may be used to remove casting defects in the form of fine pores up to total porosity of 5%. However, in cases where porosity takes the form of very large defects, the mechanical properties of the recovered region are inferior to those of the originally sound material. This effect is probably associated with the presence of very finely distributed oxide particles in the originally defective parts of the casting. The optimum hot isostatic pressing temperature for the best overall combination of properties was 950°C.MST/1732
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. K. HAL, K. C. MAINSBRIDGE, and R. E. COOPER: in Proc. RYNA Symp. ‘Materials for submarines’, London, May 1983.
2. D. W. TOWNSEND: Eng. Mater. Des. November 1969.
3. H. V. ATKINSON and B. A. RICKINSON: ‘Hot isostatic processing’, 1991, Bristol, Adam Hilger.
4. 10.1016/0025-5416(85)90245-910.1016/0025-5416(85)90245-9 ↗