Plasma surface treatment to improve fracture toughness of aluminium/aluminium foam composites
Source abstract
Abstract
In the present study, the effect of a plasma treatment using nitrogen gas on the fracture characteristics of adhesively bonded aluminium foam/aluminium composites was investigated. Fracture tests were performed on three types of single lap shear test samples: untreated aluminium foam/aluminium (case 1), plasma treated aluminium foam/untreated aluminium (case 2) and untreated aluminium foam/plasma treated aluminium (case 3). Fracture toughness was determined by the work factor method. Results showed that the plasma treatment of aluminium foam and aluminium materials using nitrogen gas has a positive effect on the fracture toughness of aluminium foam/aluminium composites. Specifically, the fracture toughness values in cases 2 and 3 improved by about 150 and 200% respectively compared with those in case 1. The fracture surface analysis showed that an adhesive fracture occurred in both cases 1 and 2, whereas a cohesive failure occurred for case 3. The occurrence of cohesive fracture was a result of increased hydrophilicity on the aluminium surface caused by the plasma treatment, which led to a greater adhesion of epoxy to the surface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Mechanical EngineeringKyungHee University, Yongin 449 701, Korea
Industrial Liaison Research InstituteSchool of Mechanical Engineering and Industrial System Engineering, KyungHee University, Yongin 449 701, Korea
Department of Architectural EngineeringKyungHee University, Yongin 449 701, Korea
References (13)
Show source-provided references
1. Jeon I., and Asahina T.: Acta Mater. 2005, 53, 3415–3423.10.1016/j.actamat.2005.04.010 ↗
2. Antoniou A., Onck P. R., and Bastawros A. F.: Acta Mater. 2004, 52, 2377–2386.10.1016/j.actamat.2004.01.028 ↗
3. 10.1002/adem.20040016410.1002/adem.200400164 ↗
4. 10.1016/j.ijmecsci.2006.06.00910.1016/j.ijmecsci.2006.06.009 ↗
5. 10.1016/S0266-3538(02)00215-410.1016/S0266-3538(02)00215-4 ↗
6. Liu P. S. · Mater. Sci. Eng. A · 2004 · 384 · 352
7. 10.1016/j.actamat.2006.05.03310.1016/j.actamat.2006.05.033 ↗
8. 10.1016/j.engfracmech.2006.12.00210.1016/j.engfracmech.2006.12.002 ↗
9. 10.1016/j.jallcom.2007.05.00610.1016/j.jallcom.2007.05.006 ↗
10. ‘ 1994 Annual book of ASTM standards’,Vol. 15.02, 263-264; 1994, Philadelphia, PA, ASTM.
11. 10.1002/ppap.20073241110.1002/ppap.200732411 ↗
12. Rice J. R. · ASTM STP 536 · 1973 · 231
13. 10.1016/S0921-5093(03)00207-710.1016/S0921-5093(03)00207-7 ↗