Development of a continuous cooling transformation diagram for Eglin steel
Source abstract
Abstract
Eglin steel is a new ultrahigh strength steel that has been developed at Eglin Air Force Base in the early 2000s. This steel could be subjected to a variety of processing steps during fabrication, each with its own thermal history. This article presents a continuous cooling transformation diagram developed for Eglin steel to be used as a guideline during processing. Dilatometry techniques performed on a Gleeble thermomechanical simulator were combined with microhardness results and microstructural characterisation to develop the diagram. The results show that four distinct microstructures form within Eglin steel depending on the cooling rate. At cooling rates above ∼1°C s−1, a predominately martensitic microstructure is formed with hardness of ∼520 HV. Intermediate cooling rates of 1 to 0.2°C s−1 produce a mixed martensitic/bainitic microstructure with a hardness that ranges from 520 to 420 HV. Slower cooling rates of 0.1 to 0.03°C s−1 lead to the formation of a bainitic microstructure with a hardness of ∼420 HV. The slowest cooling rate of 0.01°C s−1 formed a bainitic microstructure with an apparent carbide constituent at the prior austenite grain boundaries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering Lehigh University, Bethlehem, PA 18015, USA
References (22)
Show source-provided references
1. Dilmore M and Ruhlman JD, U.S. Patent 7537727B2 “Eglin Steel - A Low Alloy High Strength Composition” May 26, 2009.
2. 10.1007/BF0265220810.1007/BF02652208 ↗
3. 10.1007/BF0264243610.1007/BF02642436 ↗
4. 10.1007/BF0264285710.1007/BF02642857 ↗
5. 10.1016/j.msea.2004.11.05010.1016/j.msea.2004.11.050 ↗
6. 10.1179/174328408X27597310.1179/174328408X275973 ↗
7. 10.1179/imtr.1978.23.1.14910.1179/imtr.1978.23.1.149 ↗
8. 10.1179/imtr.1978.23.1.16410.1179/imtr.1978.23.1.164 ↗
9. Paules · Mater. Sci. Technol. · 2005 · 2 · 13
10. American Society for Testing and Materials: ‘ASTM A1033 - 10 practice for quantitative measurement and reporting of hypoeutectoid carbon and low-alloy steel phase transformations’, ASTM International, Philadelphia, PA, USA, 2010.
11. Bainite Research Committee · ISIJ Int · 1992
12. 10.1016/S0364-5916(02)00037-810.1016/S0364-5916(02)00037-8 ↗
13. Thermo-Calc Software AB, Thermo-Calc Software TCFE5 TCS Steels/Fe-Alloys Database v5.
14. Bhadeshia H · Inst. Met · 1992
15. 10.1016/B978-075068084-4/50009-110.1016/B978-075068084-4/50009-1 ↗
16. Payson P · ASM · 1944 · 33 · 261
17. Carapella LA · Met. Prog. · 1944 · 46 · 108
18. Rowland ES · Trans. ASM · 1946 · 37 · 27
19. Grange RA · Trans. AIME · 1946 · 167 · 467
20. Nehrenberg AE · Trans. AIME · 1946 · 167 · 494
21. Steven W · JISI · 1956 · 183 · 349
22. Andrews KW · JISI · 1965 · 203 · 721