Mathematical model for calculation of thickness of flame sprayed coating of aluminium on S235JR steel
Source abstract
Abstract
In the present work, the method of response surfaces was employed for the purpose of drawing up a mathematical model for the calculation (forecasting) of the thickness of a flame sprayed coating of powdered aluminium on S235JR steel. Experimental work was conducted according to a full central composite design at three levels. The thickness of the coatings made with combinations of input parameters of the procedure according to the experiment plan mentioned was measured in line with the ISO 2064 standard. A mathematical model was derived describing the dependence of the experimentally obtained thickness values on the input parameters of the procedure. The possibility of analysing the influence of the parameters upon the thickness for a certain combination of input parameters has been presented with the use of perturbation plots.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Materials Engineering and Processing · Coal Combustion and Slurry Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 1, Zagreb 10000, Croatia
References (27)
Show source-provided references
1. ‘Corrosion tests of flame-sprayed coated steel – 19-year report’, AWS C2·14-74, AWS, Miami, FL, USA, 1–31, 1974.
2. ‘Metallized coatings for corrosion control of naval ship structures and components’, National Materials Advisory Board, Committee on Thermal Spray Coatings for Corrosion Control, National Academy Press Washington, DC, USA, 1–174, 1983.
3. ‘Procedure handbook for shipboard thermal sprayed coating applications’, United States Navy David Taylor Research Center, Bethesda, MD, USA, 1–215, 1992.
4. ‘Metal sprayed coatings for corrosion protection aboard naval ships’, MS 2138-A, American Navy Military Standard, 1–40, 1992.
5. ‘Thermal spraying: new construction and maintenance’, CECW-ET Engineer Manual 1110-2-3401, Department of the Army, US Army Corps of Engineers, Washington, DC, USA, 1–88, 1999.
6. Shrestha S., and Sturgeon A. ‘Characteristics and electrochemical corrosion behaviour of thermal sprayed aluminum (TSA) coatings prepared by various wire thermal spray processes’, Proc. EUROCORR 2005, Lisbon, Portugal, September 2005, European Federation of Corrosion, 1–10.
7. 10.1016/j.surfcoat.2007.05.06710.1016/j.surfcoat.2007.05.067 ↗
8. 10.1016/j.surfcoat.2004.04.02310.1016/j.surfcoat.2004.04.023 ↗
9. 10.1016/j.conbuildmat.2008.07.00210.1016/j.conbuildmat.2008.07.002 ↗
10. 10.1016/j.surfcoat.2005.02.20010.1016/j.surfcoat.2005.02.200 ↗
11. ‘Metallic and other inorganic coatings – review of methods of measurement of thickness’, ISO 3882, ISO, Geneva, Switzerland, 2003.
12. ‘Metallische und andere anorganische Schichten – Definitionen und Festlegungen, die die Messung der Schichtdicke betreffen’, ISO 2064, ISO, Geneva, Switzerland, 1996.
13. Lugscheider E. ‘Handbuch der thermischen Spritztechnik’, DVS-Verlag, Düsseldorf, Germany, 2002.
14. ‘Merkmale und Prüfung von thermisch gepritzten Schichten’, EN 14923, BSI, London, UK, 2003.
15. ASM International Handbook Committee: in ‘ASM handbook’, Vol. 5, ‘Surface engineering’; 1994, Materials Park, OH, ASM International.
16. Montgomery D. C., and Runger G. C. ‘Applied statistics and probability for engineers’; 2003, New York, Wiley & Sons.
17. ‘Rototec LT 29220’, Castolin Eutectic international S.A., Lausanne, Switzerland, 2000.
18. ‘Test method for sieve analysis of metal powders’, ASTM Standard B214-07, ASTM, West Conshohocken, PA, USA, 1–4, 2007.
19. ‘Inspection certificate 8·1 acc. EN 10204:2004’, Certificate no. 42471, Strojopromet-Zagreb, Zagreb, Croatia, 2009.
20. Matejka D., and Benko B. ‘Plasma spraying of metallic and ceramic materials’; 1989, Bratislava, John Wiley& Sons.
21. Pawlowski L. ‘The science and engineering of thermal spray coatings’, 2nd edn; New York, John Wiley & Sons, 2007.10.1002/9780470754085 ↗
22. ‘Preparation of steel substrates before application of paints and related products’, ISO 8501-1, ISO, Geneva, Switzerland, 1–74, 2007.
23. Davis J. R. ‘Handbook of thermal spray technology’; 2004, Materials Park, OH, ASM International.
24. 10.1016/j.surfcoat.2008.04.03110.1016/j.surfcoat.2008.04.031 ↗
25. Marko M. · Mater. Metal., Metal · 2008 · 47 · 279
26. 10.1007/s11666-011-9684-310.1007/s11666-011-9684-3 ↗
27. Glogović Z. ‘Effects of oxy-fuel spraying parameters upon properties on applied coating’, PhD thesis, FAMENA, Zagreb, Croatia, 2010.