Investigation of embrittlement of step cooling heat treatment on pressure vessel steel
Source abstract
Abstract
The effects of thermal aging and step cooling embrittlement on the impact toughness of a reactor pressure vessel steel SA533B quenched and tempered (QT) with and without post-weld heat treatment (PWHT) have been studied. Charpy impact testings were conducted on the aged plates at 350°C for 5000 h to evaluate whether the embrittlement was induced by step cooling heat treatment. The results show that thermal aging increases the ductile–brittle transition temperature in both QT and PWHT states but dramatically decreases the upper shelf energy in QT state and has less effects on the PWHT state. By comparing the correlation between thermal aging embrittlement and step cooling embrittlement for both QT and PWHT states in steel, it is found that the step cooling heat treatment can obviously promote further embrittlement of the base metal in QT state but has little influence on the impact toughness in PWHT and thermal aged state. Further analysis indicates that the step cooling heat treatment cannot promote steel embrittlement at some heat treatment states. Finally, a new method is proposed to evaluate the degree of step cooling embrittlement of the pressure vessel steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory Metal Matrix Composites School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
Baoshan Iron & Steel Co. Ltd, Shanghai 201900, China
References (21)
Show source-provided references
1. 10.1016/j.ijpvp.2005.12.00110.1016/j.ijpvp.2005.12.001 ↗
2. 10.1016/0029-5493(93)90037-A10.1016/0029-5493(93)90037-A ↗
3. 10.1016/0001-6160(86)90179-310.1016/0001-6160(86)90179-3 ↗
4. 10.1016/0167-8442(87)90015-210.1016/0167-8442(87)90015-2 ↗
5. W. R. Corwin, R. K. Nanstad, D. J. Alexander and G. R. Odette: Proc.13th Int. Conf. on ‘Structural mechanics in reactor technology’, 345–350; Porto Alegre, Brazil, August 1995. International Association for Structural Mechanics in Reactor Technology.
6. Tavassoli AA · ASTM·STP · 1989 · 1042 · 100
7. 10.1016/S0022-3115(98)00467-X10.1016/S0022-3115(98)00467-X ↗
8. 10.1007/BF0264410310.1007/BF02644103 ↗
9. 10.1016/0308-0161(93)90126-E10.1016/0308-0161(93)90126-E ↗
10. Han GW · J. Xi'an Jiaotong Univ. · 1993 · 27 · 109
11. 10.1016/S1359-6462(99)00069-X10.1016/S1359-6462(99)00069-X ↗
12. Li YL · J. Iron. Steel Res. Int. · 2011 · 18 · 412
13. 10.1016/0001-6160(86)90193-810.1016/0001-6160(86)90193-8 ↗
14. 10.1016/0167-8442(88)90004-310.1016/0167-8442(88)90004-3 ↗
15. 10.1016/S1359-6454(99)00200-110.1016/S1359-6454(99)00200-1 ↗
16. 10.1016/j.jmps.2003.07.00510.1016/j.jmps.2003.07.005 ↗
17. Bhadeshia HKDH, Honeycombe RWK: ‘Steel: microstructure and properties’, 3rd edn, 191–200; 2006, Amsterdam, Elsevier Ltd.
18. 10.1016/S0022-3115(01)00610-910.1016/S0022-3115(01)00610-9 ↗
19. 10.1016/j.matchemphys.2009.06.02010.1016/j.matchemphys.2009.06.020 ↗
20. Pickering FB: ‘Constitution and properties of steels’, (Materials Science and Technology: Vol. 7), 168–171; 1992, New York, VCH.
21. Inoue T · ISIJ Int. · 1980 · 66 · 1532