Laser welding of ZrO 2 ceramic and 304 stainless steel with Ag–Cu–Ti filler
Source abstract
Abstract
In this paper, the joining of ZrO 2 ceramic and 304 stainless steel (SS) was realised by laser offset welding with AgCuTi filler metal. The heat was transferred from the molten pool to the solder through the unmelted SS. AgCuTi would diffuse to form eutectic products with low melting point, forming metallurgical reaction zone. The unmelted SS was retained by laser migration to avoid the mixing of molten solder and molten pool, which reduced the content of brittle phase in the joint. In addition, the crack-free welded joint with a tensile strength of 71 MPa was obtained. The elemental diffusion model was used to simulate the interfacial microstructure changes, and the microstructure was reasonably predicted by changing the welding parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Xinjiang University, Wulumuqi, People's Republic of China
Funding
National Natural Science Youth Fund · Postdoctoral Research Project on Innovation Practice in Jiangmen City
References (56)
Show source-provided references
1. 10.1007/s40145-018-0297-x10.1007/s40145-018-0297-x ↗
2. 10.1016/j.jmrt.2020.11.08810.1016/j.jmrt.2020.11.088 ↗
3. 10.1016/j.ijhydene.2020.12.05910.1016/j.ijhydene.2020.12.059 ↗
4. Alves F, Baptista AM, Marques AT. Adv Compos Mater Aerosp Eng. England: Woodhead Publishing; 2016. p. 59–99.
5. Atabaki MM. Recent progress in joining of ceramic powder metallurgy products to metals. Metalurgija Sisak Then Zagreb. 2010;16(4):255–268.
6. 10.1016/j.vacuum.2018.09.02810.1016/j.vacuum.2018.09.028 ↗
7. 10.1016/j.corsci.2021.10933810.1016/j.corsci.2021.109338 ↗
8. 10.1016/j.surfcoat.2021.12779010.1016/j.surfcoat.2021.127790 ↗
9. 10.1016/j.jmatprotec.2011.06.00310.1016/j.jmatprotec.2011.06.003 ↗
10. 10.1016/j.jmatprotec.2017.08.01710.1016/j.jmatprotec.2017.08.017 ↗
11. 10.1007/s40194-015-0224-510.1007/s40194-015-0224-5 ↗
12. Hausner S, Wielage B. Brazing of metal and ceramic joints. Advances in brazing. England: Woodhead Publishing; 2013. p. 361–393.
13. 10.1016/j.matdes.2015.07.11210.1016/j.matdes.2015.07.112 ↗
14. 10.1016/j.ceramint.2015.02.00610.1016/j.ceramint.2015.02.006 ↗
15. 10.1007/s42452-020-2622-610.1007/s42452-020-2622-6 ↗
16. 10.1016/j.jmapro.2019.07.04010.1016/j.jmapro.2019.07.040 ↗
17. Hou XH, Yu JK. Effect of Na2B4O7 addition on the structure and properties of Al2O3 ceramic-lined steel pipe prepared by the GS-SHS method. Ceramics–Silikáty. 2018;62(1):74–80.
18. Tillmann W Schaak C Pfeiffer J.. Reactive partial transient liquid phase bonding (R-PTLPB) of YSZ to Crofer22APU using Nickel and Copper-Nickel as core interlayers. 2015;403–410.
19. 10.1016/j.jmat.2021.11.00610.1016/j.jmat.2021.11.006 ↗
20. 10.1007/s11665-018-3339-110.1007/s11665-018-3339-1 ↗
21. 10.1016/j.matlet.2021.13105010.1016/j.matlet.2021.131050 ↗
22. Jia L, Guangmin S, Li H. Ti/Nb as interlayer pulse pressure diffusion bonding TiC cermet and stainless steel. Mater Eng. 2017;45(3):54–59.
23. Huang W, Li Y, Wang J. Shear strength and fracture characteristics of the Al2O3-TiC/Q235 vacuum diffusion bonded joint. Kov Mater Met Mater. 2016;54(1):55–60.
24. 10.1016/j.ceramint.2019.10.00310.1016/j.ceramint.2019.10.003 ↗
25. 10.1007/s11665-012-0122-610.1007/s11665-012-0122-6 ↗
26. 10.1016/j.ceramint.2014.01.06410.1016/j.ceramint.2014.01.064 ↗
27. 10.1016/j.jeurceramsoc.2010.07.00510.1016/j.jeurceramsoc.2010.07.005 ↗
28. 10.1515/htmp-2016-018310.1515/htmp-2016-0183 ↗
29. 10.1016/j.vacuum.2017.10.03010.1016/j.vacuum.2017.10.030 ↗
30. 10.1016/j.matlet.2006.10.05810.1016/j.matlet.2006.10.058 ↗
31. Smith WF, Hashemi J. Foundations of materials science and engineering. New York: Mcgraw-Hill Publishing; 2006.
32. Yajiang L, Juan W, Yansheng Y The diffusion of interface elements between Fe_3Al alloy and Q235 steel diffusion welding. J Weld. 2005;04:41–44.
33. Yajiang L, Juan W, Yansheng Y Element diffusion near the interface of Fe_3Al/18-8 stainless steel diffusion welding. J Metal. 2005;02:150–156.
34. Peng H, Jicai F, Yicai Q Numerical analysis of element concentration distribution in diffusion bonding zone. J Weld. 2002;03:80–82.
35. 10.1016/S0966-9795(98)00139-310.1016/S0966-9795(98)00139-3 ↗
36. 10.1007/BF0264721010.1007/BF02647210 ↗
37. 10.1016/0956-7151(90)90019-D10.1016/0956-7151(90)90019-D ↗
38. Zhaorong L. Metal superplastic forming principle and application. Beijing: Aviation Industry Publishing House; 1990–1992.
39. Peng H, Jiuhai Z, Jicai F Numerical simulation of phase transition diffusion bonding interface to generate intermetallic compounds. J Weld. 2000;03:75–78.
40. Peng L. Study on microstructure and element diffusion of Mg/Al active dissimilar metal welding interface. Shandong: Shandong University; 2006. p. 94–120.
41. Kangsheng H, Fuxiong C. Welding of dissimilar metals. Beijing: Mechanical Industry Press; 1986; p. 309–322.
42. 10.1016/0001-6160(69)90131-X10.1016/0001-6160(69)90131-X ↗
43. 10.1016/0956-7151(90)90020-H10.1016/0956-7151(90)90020-H ↗
44. 10.1007/s10051005029910.1007/s100510050299 ↗
45. 10.1016/S0925-8388(99)00124-310.1016/S0925-8388(99)00124-3 ↗
46. 10.1023/A:101166821646710.1023/A:1011668216467 ↗
47. Changxu S, Hengde L, Lian Z. Handbook of materials science and engineering. Beijing: Chemical Industry Press; 2004.
48. 10.1016/j.jallcom.2021.16093310.1016/j.jallcom.2021.160933 ↗
49. Qiangyong Z, Xianrui Z, Guixiang L 304 stainless steel laser welding process and numerical simulation. Electr Welding Mach. 2021;51(04):1–8.
50. Jialei Z, Shilong X, Xiangdong J Research on laser lap welding process of 304 stainless steel sheet. Prog Laser Optoelectron. 2015;52(07):160–164.
51. 10.1016/j.carbon.2022.01.06510.1016/j.carbon.2022.01.065 ↗
52. 10.1016/j.jmatprotec.2017.11.05610.1016/j.jmatprotec.2017.11.056 ↗
53. 10.1016/j.corsci.2022.11023110.1016/j.corsci.2022.110231 ↗
54. 10.1007/s40194-015-0276-610.1007/s40194-015-0276-6 ↗
55. 10.1016/j.vacuum.2017.08.01710.1016/j.vacuum.2017.08.017 ↗
56. 10.1016/j.jmrt.2019.10.07510.1016/j.jmrt.2019.10.075 ↗