Bore Polish
Source abstract
Abstract
Bore polishing, associated mainly with turbocharged diesel internal combustion engines, results in reduced engine durability and increased oil consumption. This is a result of the formation of smooth regions on the cylinder liner exhibiting a surface finish of < 0.1 Jim R a and the removal of the crosshoned machined pattern. In addition, metallographic examination enables the graphite morphology of the cast iron cylinder bore to be resolved. A number of engine tests have been developed for evaluating the bore polishing tendency of lubricant formulations but problems are faced in standardisation owing to changes in the design of test engines or engines becoming obsolete. This paper reviews the published literature on bore polishing with the intention of determining the requirements for the development of a cost effective bench test method to simulate the phenomenon. The published literature has revealed some contradiction and that the factors influencing bore polish are ill understood. An attempt is made to identify the major factors influencing bore polish such that they can be considered in the development of a bench test for evaluation of lubricant chemistry and component metallurgy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lubricants and Their Additives · Tribology and Lubrication Engineering · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. ROBERTS D. C.: ‘Future engine oil requirements — a European view point’ Paper 881579 SAE Warrendale PA USA 1988.10.4271/881579 ↗
2. 10.1016/0043-1648(69)90340-810.1016/0043-1648(69)90340-8 ↗
3. 10.1016/0301-679X(76)90046-310.1016/0301-679X(76)90046-3 ↗
4. WILSON J. V. D. and CALLOW J. R. B.: ‘Cylinder bore polishing in automotive diesel engines — a progress report on a European study’ Paper 760722 SAE Warrendale PA USA 1976.10.4271/760722 ↗
5. 10.2516/ogst:198202610.2516/ogst:1982026 ↗
6. McGEETIEN J. A.: ‘Effect of piston deposits fuel sulphur and lubricant viscosity on diesel engine oil consumption and cylinder bore polishing’ Paper 831721 SAE Warrendale PA USA 1983.
7. 10.1016/0301-679X(87)90004-110.1016/0301-679X(87)90004-1 ↗
8. HAGGH B. and HOLMER E.: ‘Experience and development of turbocharged diesel engines in Scandinavia’ Paper 690746 SAE Warrendale PA USA 1969.10.4271/690746 ↗
9. SOULE G. E.: ‘Turbocharged diesel engines in production’ Proc. Institution of Mechanical Engineers 1969-70 Vol. 184 Paper 3A.10.1243/PIME_CONF_1969_184_011_02 ↗
10. PARSONS G. J.: in Proc. Symp. on ‘Performance of automotive fuels and lubricants’ Rome Italy June 1981 CEC 835-854.
11. 10.1016/0301-679X(88)90080-110.1016/0301-679X(88)90080-1 ↗
12. 10.1016/0043-1648(90)90014-210.1016/0043-1648(90)90014-2 ↗
13. GUERTLER R. W.: ‘Excessive cylinder wear and bore polishing in heavy duty diesel engines: causes and proposed remedies’ Paper 860165 SAE Warrendale PA USA 1986.10.4271/860165 ↗
14. MeGEEHEN J. A. and FONTANA B. J.: ‘Effect of soot on piston deposits and crankcase oils: infrared spectrometric technique for analyzing soot’ Paper 801368 SAE Warrendale PA USA 1980.10.4271/801368 ↗
15. McGEEHEN J. A. FONTANA B. J. and KRAMER J. D.: ‘The effects of piston temperature and fuel sulphur on diesel engine piston deposits’ Paper 821216 SAE Warrendale PA USA 1982.10.4271/821216 ↗
16. 10.1016/0301-679X(86)90016-210.1016/0301-679X(86)90016-2 ↗
17. NAITOH Y. HOSONUMA K. TAMURA K. MIYAHARA M. and WATANABE Y.: ‘Investigation into extending diesel engine oil drain interval: Part 2 — Development of long drain diesel engine oil having low soot dispersancy’ Paper 912340 SAE Warrendale PA USA 1991.10.4271/912340 ↗
18. SUN R. KITTELSON D. B. and BLACKSHEEN P. L.: ‘Size distribution of diesel soot in the lubricating oil’ Paper 912344 SAE Warrendale PA USA 1991.10.4271/912344 ↗
19. ABELL R. F.: ‘IC engine earn and tappet wear experience’ Paper 770019 SAE Warrendale PA USA 1977.10.4271/770019 ↗
20. ROUNDS F. G.: ‘Carbon: cause of diesel engine wear?’ Paper 770829 SAE Warrendale PA USA 1977.10.4271/770829 ↗
21. ROUNDS F. G.: ASLE Trans. 1986 43 (4) 273–282.
22. 10.1016/0043-1648(85)90027-410.1016/0043-1648(85)90027-4 ↗
23. 10.1016/0043-1648(88)90143-310.1016/0043-1648(88)90143-3 ↗
24. KNIGHT C. R. and WEISER H.: ‘Lubrication requirements of European automotive diesel engines’ Paper 760721 SAE Warrendale PA USA 1976.10.4271/760721 ↗
25. SLONE R. PATTERSON D. J. MORRISON K. M. and SCHWARTZ G. B.: ‘Wear of piston rings and liners by laboratory simulation’ Paper 890146 SAE Warrendale PA USA 1989.10.4271/890146 ↗