Preparation of in situ Cr@Graphene/Fe nanocomposite inoculant and its refining effect on microstructure and properties of W 18 Cr 4 V high-speed steel
Source abstract
Abstract
This study investigated the design and preparation of a Cr@Graphene/Fe nanocomposite inoculant via in situ synthesis in a vacuum tube furnace and mechanical grinding in a ball grinder, where material thermodynamics were considered to refine W 18 Cr 4 V high-speed steel (HSS). The effect of modification on the microstructure of W 18 Cr 4 V HSS was evaluated using high-resolution transmission electron microscopy and X-ray diffraction. The [Formula: see text] planes of the Fe 3 W 3 C phase and[Formula: see text] planes of the Cr 7 C 3 phase had collaborative points in the reciprocal space, indicating a coplanar relationship between the Fe 3 W 3 C and Cr 7 C 3 lattices. This contributed to an improved nucleation rate and refined matrix structure. The mechanical properties of the W 18 Cr 4 V HSS, namely hardness, wear mass, and impact energy, exhibited an overall improvement after modification. Specifically, the hardness and impact toughness after modification and heat treatment increased to 65.2 HRC and 0.209 MJ m −2 , respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory for New Type of Functional Materials in Hebei Province, School of Materials Science and Technology, Hebei University of Technology, Tianjin, People's Republic of China
Funding
National Natural Science Foundation of China
References (34)
Show source-provided references
1. 10.1007/s11041-005-0031-510.1007/s11041-005-0031-5 ↗
2. 10.2355/isijinternational.41.150210.2355/isijinternational.41.1502 ↗
3. 10.1179/1743284714Y.000000055810.1179/1743284714Y.0000000558 ↗
4. 10.4028/www.scientific.net/AMR.217-218.45710.4028/www.scientific.net/AMR.217-218.457 ↗
5. 10.1016/S1002-0721(10)60604-710.1016/S1002-0721(10)60604-7 ↗
6. 10.1016/S1002-0721(07)60484-010.1016/S1002-0721(07)60484-0 ↗
7. 10.1016/S1002-0721(07)60462-110.1016/S1002-0721(07)60462-1 ↗
8. Chaus AS · Met Sci Heat Treat · 2011 · 52 · 575
9. 10.1016/j.msea.2018.09.07410.1016/j.msea.2018.09.074 ↗
10. 10.1134/S003602950808024710.1134/S0036029508080247 ↗
11. 10.1179/003258905X3760210.1179/003258905X37602 ↗
12. 10.1016/j.msea.2019.05.10410.1016/j.msea.2019.05.104 ↗
13. 10.1007/BF0265165710.1007/BF02651657 ↗
14. 10.1016/j.matlet.2018.09.01710.1016/j.matlet.2018.09.017 ↗
15. 10.1016/j.matdes.2015.07.05510.1016/j.matdes.2015.07.055 ↗
16. 10.1016/j.triboint.2018.12.03110.1016/j.triboint.2018.12.031 ↗
17. 10.1016/j.rinp.2019.02.08910.1016/j.rinp.2019.02.089 ↗
18. 10.1016/j.eng.2018.11.02410.1016/j.eng.2018.11.024 ↗
19. 10.1016/j.msea.2018.09.11010.1016/j.msea.2018.09.110 ↗
20. 10.1016/j.surfcoat.2018.09.08610.1016/j.surfcoat.2018.09.086 ↗
21. Hu GX. Fundamentals of Materials Science. Shanghai Jiao Tong University Press; 2006. p. 178–181.
22. 10.1016/S0921-5093(98)00694-710.1016/S0921-5093(98)00694-7 ↗
23. 10.1016/j.msea.2006.06.12510.1016/j.msea.2006.06.125 ↗
24. Xu LJ · Tribology · 2006 · 26 · 377
25. 10.1016/j.wear.2008.12.10110.1016/j.wear.2008.12.101 ↗
26. 10.1016/j.msea.2019.03.12510.1016/j.msea.2019.03.125 ↗
27. 10.1016/j.msea.2018.08.08210.1016/j.msea.2018.08.082 ↗
28. Wang Y · Mater Sci Eng A · 2019 · 138642
29. 10.1016/j.msea.2019.03.12510.1016/j.msea.2019.03.125 ↗
30. 10.1107/S002188988708619910.1107/S0021889887086199 ↗
31. Ai Y · Phys Test Chem Anal Part A · 2011 · 2 · 12
32. 10.1006/jcph.1996.561210.1006/jcph.1996.5612 ↗
33. Yang Q · Acta Crystallographica B · 1987 · 1
34. 10.1016/j.commatsci.2013.09.04010.1016/j.commatsci.2013.09.040 ↗