Optimising inclusion and toughening the heat-affected zone of ship plate steel with MgO nanoparticles
Source abstract
Abstract
The effect of adding MgO nanoparticles to ship plate steel at welding heat-affected zones (HAZs) was experimentally studied. The results showed that the added nanoparticles obviously optimised the inclusions; the average size of the inclusions was significantly reduced, and the distribution was relatively uniform. The toughness of the base metal and HAZ increased by 20–60 J, apart from a slight decrease in the strength of the fine-grained heat-affected zone and a nearly unchanged strength in the coarse-grained heat-affected zone, and approximately ∼2 μm (Mg–Al–Ti)O-containing inclusions induced acicular ferrite effectively, thereby simultaneously enhancing the strength and toughness of the inter-critical heat-affected zone. In conclusion, these performance improvements in both the base metal and HAZ could be attributed to grain refinement and inclusion optimisation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, People's Republic of China
Beijing Key Laboratory of Special Melting and Preparation of High-End Metals, Beijing, People's Republic of China
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing, People's Republic of China
Funding
National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities
References (32)
Show source-provided references
1. Kojima A · Nippon Steel Tech Rep · 2004 · 380 · 33
2. 10.1007/s10853-010-4803-y10.1007/s10853-010-4803-y ↗
3. 10.1007/BF0335095610.1007/BF03350956 ↗
4. Takamura J, Mizoguchi S. Control of oxides as inoculants metallurgy of oxides in steel. Proceedings of the 6th international iron and steel congress, ISIJ International, Nagoya. 1990. p. 2331–2342.
5. 10.1016/S1006-706X(12)60035-110.1016/S1006-706X(12)60035-1 ↗
6. 10.2355/isijinternational.51.115110.2355/isijinternational.51.1151 ↗
7. 10.1016/S1044-5803(01)00155-310.1016/S1044-5803(01)00155-3 ↗
8. 10.1016/j.matchar.2010.04.00410.1016/j.matchar.2010.04.004 ↗
9. 10.1016/j.matchar.2006.11.02810.1016/j.matchar.2006.11.028 ↗
10. 10.1002/srin.20080614310.1002/srin.200806143 ↗
11. 10.1080/03019233.2018.151693610.1080/03019233.2018.1516936 ↗
12. 10.1016/j.scriptamat.2005.08.00110.1016/j.scriptamat.2005.08.001 ↗
13. 10.1016/S1359-6454(02)00560-810.1016/S1359-6454(02)00560-8 ↗
14. 10.1007/s11663-017-1163-x10.1007/s11663-017-1163-x ↗
15. 10.1016/j.actamat.2009.10.04310.1016/j.actamat.2009.10.043 ↗
16. 10.1007/s11661-015-3237-110.1007/s11661-015-3237-1 ↗
17. 10.1016/j.matdes.2019.10800410.1016/j.matdes.2019.108004 ↗
18. 10.1179/1743281215Y.000000001410.1179/1743281215Y.0000000014 ↗
19. Wang LZ · Sci Rep · 2019 · 9 · 110.1038/s41598-018-37186-2 ↗
20. 10.2355/isijinternational.34.41410.2355/isijinternational.34.414 ↗
21. 10.1016/j.msea.2014.05.02010.1016/j.msea.2014.05.020 ↗
22. 10.2355/isijinternational.46.4210.2355/isijinternational.46.42 ↗
23. 10.2355/tetsutohagane1955.87.11_70710.2355/tetsutohagane1955.87.11_707 ↗
24. 10.1016/j.actamat.2016.07.02710.1016/j.actamat.2016.07.027 ↗
25. 10.1088/0034-4885/12/1/30910.1088/0034-4885/12/1/309 ↗
26. Wang XS · Acta Metall Sin · 2005 · 41 · 1272
27. 10.1007/s11663-015-0552-210.1007/s11663-015-0552-2 ↗
28. 10.1016/j.jmatprotec.2010.05.01810.1016/j.jmatprotec.2010.05.018 ↗
29. 10.1016/j.msea.2018.07.00110.1016/j.msea.2018.07.001 ↗
30. 10.1007/s11665-008-9225-510.1007/s11665-008-9225-5 ↗
31. Gladman T · J Iron Steel Inst · 1972 · 210 · 916
32. 10.2355/isijinternational.35.102710.2355/isijinternational.35.1027 ↗