Notch fatigue behaviour of low-temperature gaseous carburised 316L austenitic stainless steel
Source abstract
Abstract
The influence of low-temperature gaseous carburisation on notch fatigue behaviour of 316L steel under cyclic axial loading was investigated. After carburisation, the carburised case was well distributed at the surface region and was not influenced by the notch geometry. Low-temperature carburisation considerably enhanced the notch fatigue performance, which led to 32% and 44% increase in the endurance limits for the specimens with stress concentration factors K t = 1.91 and 3.91, respectively. The notch sensitivity of 316L steel reduced after carburisation. Irrespective of the applied stress amplitude, the fatigue crack nucleation sites were always at the notch root surface for the untreated specimens. For the carburised specimens, fatigue cracks nucleation changed from surface at high-level stress to subsurface at low-level stress.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Power Engineering, Nanjing Tech University, Nanjing, People's Republic of China
Jiangsu Key Lab of Design and Manufacture of Extreme Pressure Equipment, Nanjing, People's Republic of China
Funding
National Natural Science Foundation of China
References (25)
Show source-provided references
1. 10.1179/02670840222500626810.1179/026708402225006268 ↗
2. Mittemeijer EJ · 2015
3. 10.1016/j.wear.2006.12.04910.1016/j.wear.2006.12.049 ↗
4. 10.1016/j.surfcoat.2014.07.08110.1016/j.surfcoat.2014.07.081 ↗
5. 10.1016/j.ijfatigue.2003.08.02410.1016/j.ijfatigue.2003.08.024 ↗
6. 10.1016/j.surfcoat.2007.07.06610.1016/j.surfcoat.2007.07.066 ↗
7. 10.1016/j.actamat.2007.06.02510.1016/j.actamat.2007.06.025 ↗
8. 10.1016/j.msea.2019.13852410.1016/j.msea.2019.138524 ↗
9. 10.1016/j.electacta.2015.06.10210.1016/j.electacta.2015.06.102 ↗
10. 10.1016/j.surfcoat.2017.08.05810.1016/j.surfcoat.2017.08.058 ↗
11. 10.4028/www.scientific.net/KEM.353-358.24310.4028/www.scientific.net/KEM.353-358.243 ↗
12. 10.1007/s11665-018-3149-510.1007/s11665-018-3149-5 ↗
13. 10.1016/j.surfcoat.2005.09.01810.1016/j.surfcoat.2005.09.018 ↗
14. 10.1051/epjconf/2010060200310.1051/epjconf/20100602003 ↗
15. 10.1016/j.surfcoat.2016.05.04710.1016/j.surfcoat.2016.05.047 ↗
16. 10.1016/j.actamat.2005.11.02910.1016/j.actamat.2005.11.029 ↗
17. 10.1016/j.apsusc.2011.06.15810.1016/j.apsusc.2011.06.158 ↗
18. 10.1016/j.actamat.2014.12.05710.1016/j.actamat.2014.12.057 ↗
19. 10.1016/j.matdes.2016.03.16210.1016/j.matdes.2016.03.162 ↗
20. 10.1016/j.surfcoat.2017.05.03610.1016/j.surfcoat.2017.05.036 ↗
21. Neuber H. · 1946
22. Wollmann M, Atoura J, Mhaede M Comparing fatigue notch sensitivities of various alloys before and after mechanical surface treating. In: J. Champaigne, editor. 11th International Conference on Shot Peening ICSP11, 2011, South Bend, Indiana, USA, Shot Peening; 2011. p. 423–428.
23. 10.1007/s40195-018-0710-z10.1007/s40195-018-0710-z ↗
24. 10.1016/j.ijfatigue.2009.10.00510.1016/j.ijfatigue.2009.10.005 ↗
25. 10.1016/j.ijfatigue.2012.07.01410.1016/j.ijfatigue.2012.07.014 ↗