journal article·2014-07

Heterogeneous austenite grain growth in ASTM A213 Grade T91 steels: Analysis of austenitic grain size distribution using kernel density estimation methodology

N. E. Zavaleta Gutiérrez, I. Toda-Caraballo, M. I. Luppo, C. Capdevila, C. García de Andrés, C. A. Danon

Materials Science and Technology· Volume 30· Issue 8
Publisher page

Abstract

The present work studies, using statistical methods, the features of austenite grain size distributions (AGSDs) obtained in an ASTM A213-T91 steel by applying two-step thermal cycles, namely, thermal treatment at tempering temperature+‘ in situ’ austenitisation. Changes in AGSD were produced by varying the holding time at tempering temperature and the heating rate to austenite. The application of different thermal cycle conditions induced two main characteristics in the AGSDs, i.e. the growth of a few very large grains in a matrix of small to medium sized grains, that is, heterogeneous grain size, and a bimodal grain size distribution in that matrix. Statistical techniques were used to describe the resulting AGSDs and to investigate a possible correlation between bimodality and heterogeneity. The characterisations have been carried out using the kernel density estimation (KDE) technique to compute the underlying statistical distribution, and then applying a significance test able to assess whether or not bimodality, if detected with KDE, is statistically significant. Results indicate that bimodality is evidenced for the higher heating rates to austenite and is very likely related to the development of the heterogeneous grain size structure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Comision Nacional de Energia Atomica, San Martín, Buenos Aires, Argentina

References (44)

Show source-provided references
1. 10.2355/isijinternational.32.17510.2355/isijinternational.32.175 ↗
2. 10.2355/isijinternational.41.61210.2355/isijinternational.41.612 ↗
3. 10.1179/174328005X4114010.1179/174328005X41140 ↗
4. 10.2355/isijinternational.41.64110.2355/isijinternational.41.641 ↗
5. 10.2355/isijinternational.39.87410.2355/isijinternational.39.874 ↗
6. 10.1016/S0921-5093(00)00831-510.1016/S0921-5093(00)00831-5 ↗
7. Shibli IA · OMNI · 2002 · 1 · 1
8. 10.1007/s11661-004-0025-810.1007/s11661-004-0025-8 ↗
9. 10.1007/BF0266236610.1007/BF02662366 ↗
10. 10.1179/msc.1979.13.3-4.13110.1179/msc.1979.13.3-4.131 ↗
11. Zener C · Trans. AIME · 1948 · 175 · 15
12. 10.1007/BF0035280110.1007/BF00352801 ↗
13. Rossi A., Mascanzoni A., Crispoldi G. and de Meo F. ‘Development of a Nb-Ti-N steel for production of tractor links by hot forging and direct quenching’, in ‘Fundamentals of microalloying forging steels’, (ed. Kraus G and Banerji S K), 351–365; 1987, Warrendale, PA, TMS-AIME.
14. Gladman T · J. Iron Steel Inst. · 1967 · 205 · 653
15. 10.1179/03063457779043285710.1179/030634577790432857 ↗
16. Speich GR, Cuddy LJ, Gordon CR and DeArdo AJ: ‘Formation of ferrite from control-rolled austenite’, in ‘Phase transformations in ferrous alloys’, (ed. Marder A R and Goldstein J I), 341–389; 1984, Warrendale, PA, TMS-AIME.
17. Baker T: in ‘Future developments of metals and ceramics’, (ed. Charles J A et al.), 75; 1992, London, Institute of Materials.
18. 10.2320/matertrans.45.279710.2320/matertrans.45.2797 ↗
19. 10.1016/S0921-5093(02)00632-910.1016/S0921-5093(02)00632-9 ↗
20. Brachet JC · Mém. Et. Sci. Rev. Métall. · 1990 · 87 · 33
21. 10.1007/BF0119196210.1007/BF01191962 ↗
22. Morozov OP · Phys. Met. Metall. · 1986 · 61 · 100
23. 10.1016/j.ijplas.2006.03.00410.1016/j.ijplas.2006.03.004 ↗
24. 10.1016/0001-6160(81)90142-510.1016/0001-6160(81)90142-5 ↗
25. 10.1016/0956-7151(93)90044-S10.1016/0956-7151(93)90044-S ↗
26. 10.1007/BF0070080310.1007/BF00700803 ↗
27. Zavaleta Gutiérrez N · Mater. Sci. Technol.
28. 10.1016/S1044-5803(02)00259-010.1016/S1044-5803(02)00259-0 ↗
29. ASTM International: ‘Standard test methods for determining average grain size’, Standard E112-10, ASTM International, West Conshohocken, PA, USA, 2010.
30. Silverman BW: ‘Density estimation for statistics and data analysis’, in ‘Monographs on statistics and applied probability’; 1986, London, Chapman and Hall.
31. 10.1080/01621459.1995.1047663010.1080/01621459.1995.10476630 ↗
32. Marron JS: ‘Smoothing, functional data analysis, and distance weighted discrimination software’, 2008. http://vm1.cas.unc.edu/stat-or/webspace/miscellaneous/marron/Matlab7Software/.
33. 10.1016/0036-9748(82)90264-210.1016/0036-9748(82)90264-2 ↗
34. 10.1198/10618600231737559610.1198/106186002317375596 ↗
35. http://www.unc.edu/∼marron/marron.html.
36. Zavaleta Gutiérrez N: PhD thesis, Institute of Technology ‘Jorge Sábato’, National University of San Martín, San Martín, Argentina, 2010.
37. 10.1016/j.msea.2011.01.11610.1016/j.msea.2011.01.116 ↗
38. 10.1063/1.32758010.1063/1.327580 ↗
39. 10.1016/j.jcrysgro.2008.03.03410.1016/j.jcrysgro.2008.03.034 ↗
40. 10.1016/j.matchar.2006.06.01410.1016/j.matchar.2006.06.014 ↗
41. 10.1016/1044-5803(92)90101-M10.1016/1044-5803(92)90101-M ↗
42. 10.2355/isijinternational.47.117810.2355/isijinternational.47.1178 ↗
43. 10.1016/0001-6160(86)90064-710.1016/0001-6160(86)90064-7 ↗
44. 10.1016/j.actamat.2004.05.00110.1016/j.actamat.2004.05.001 ↗