Study of grain refinement and eutectic transformation of undercooled IN718 superalloy
Source abstract
Abstract
A substantial undercooling up to 250 K was produced in the IN718 superalloy melt by employing the method of molten salt denucleating, and the microstructure evolution with undercooling was investigated. Within the achieved undercooling, 0–250 K, the solidification microstructure of IN718 undergoes two grain refinements: the first grain refinement occurs in a lower range of undercooling, which results from the ripening and remelting of the primary dendrite, and at a larger range of undercooling, grain refinement attributes to solidification shrinkage stress and lattice distortion energy originating from the rapid solidification process. A ‘lamellar eutectic anomalous eutectic’ transition was observed when undercooling exceeds a critical value of ∼250 K. When undercooling is small, owing to niobium enrichment in interdendrite, the remaining liquid solidifies as eutectic ( γ+Laves phase); whereas, if the undercooling achieves 250 K, the interdendrite transforms from eutectic ( γ+Laves phase) to Laves phase, which results from the formation of divorced eutectic arising from the huge variance of the growth velocities of γ and Laves phases.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Aeronautics Northwestern Polytechnical University, Xi'an 710072, China
State Key Laboratory of Solidification Processing Northwestern Polytechnical University, Xi'an 710072, China
References (23)
Show source-provided references
1. Walker JW: in ‘Principles of solidification’, (, Charlmers B); 1964, New York, Interscience Publishers.
2. 10.1016/j.matlet.2006.06.02810.1016/j.matlet.2006.06.028 ↗
3. 10.1016/S0022-0248(01)01438-510.1016/S0022-0248(01)01438-5 ↗
4. 10.1007/s10853-011-5493-910.1007/s10853-011-5493-9 ↗
5. Kattamis TZ · Trans. TMS-AIME · 1966 · 236 · 1523
6. 10.1016/S0921-5093(00)01553-710.1016/S0921-5093(00)01553-7 ↗
7. Powell GLF · Trans. TMS-AIME · 1968 · 242 · 2133
8. 10.1016/j.msea.2010.09.04710.1016/j.msea.2010.09.047 ↗
9. 10.1016/0304-3991(89)90255-610.1016/0304-3991(89)90255-6 ↗
10. 10.7449/1989/Superalloys_1989_69_7710.7449/1989/Superalloys_1989_69_77 ↗
11. 10.4028/www.scientific.net/RC.3510.4028/www.scientific.net/RC.35 ↗
12. Boettinger WJ, CoriellSR, Trivedi R: ‘Rapid solidification processing: principles and technologies’; 1988, Baton Rouge, LA, Claitor's Publishing Division.
13. 10.1063/1.36705710.1063/1.367057 ↗
14. Brandes E A: ‘Smithells metals reference book’, 7th edn; 2006, London, Butterworth-Heinemann.
15. Nastac L · Metall. Mater. Trans. A · 1966 · 27 · 407510.1007/BF02595656 ↗
16. Lux B · Metallurgy · 1981 · 35 · 1235
17. Chai G · Z. Metallkd · 1995 · 86 · 54
18. 10.1007/BF0264895410.1007/BF02648954 ↗
19. 10.7449/1989/Superalloys_1989_59_6810.7449/1989/Superalloys_1989_59_68 ↗
20. 10.1007/BF0265030010.1007/BF02650300 ↗
21. Jackson KA · Trans. Metall. Soc. AIME · 1966 · 236 · 1129
22. Li M · Acta. Mater. · 2002 · 50 · 3239
23. Wei B · Mater. Sci. Eng. A · 1994 · 181 · 6