journal article·2002-01

Interfacial morphology and strength of Al2O3/Nb joint brazed with Cu -Ti -Zr filler metal

Z.-S. Yu, M.-F. Wu, C. Liang, F.-J. Wang, K. Qi

Materials Science and Technology· Volume 18· Issue 1
Publisher page

Abstract

In the present work ceramic Al2O3 was brazed to Nb using Cu -Ti- Zr as filler metal. The morphologies and chemical compositions of the phases formed were studied by SEM combined with energy dispersive spectroscopy and X-ray diffraction. It was found that the interfacial structure of joints brazed with Cu70Ti25Zr5 filler metal at 1293 K for 10 min was Al2O3/Cu2Ti4O/Nb solid solution/CuTi/Cu solid solution + CuTi with the formation of the new phases Cu2Ti4O, Ti solid solution, and CuTi. The joint strength was investigated using a tensile/shear testing machine. According to the experimental results, an Al2O3/Cu70Ti25Zr5/Nb joint brazed at 1293 K for 10 min can support a stress of 162 MPa. For lower contents of Ti and lower bonding times, or higher contents of Ti and higher bonding times, the strength of the joint was lower than the above value.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. 10.1179/mst.1997.13.3.18210.1179/mst.1997.13.3.182 ↗
2. YOO Y. C. · Mater. Sci. Technol · 1999 · 15 · 133110.1179/026708399101505293 ↗
3. 10.1007/BF0265185610.1007/BF02651856 ↗
4. 10.1111/j.1151-2916.1990.tb09799.x10.1111/j.1151-2916.1990.tb09799.x ↗
5. HAO H. Q. · Xian Traffic Univ. Trans · 1994 · 28 · 67
6. 10.1038/168558a010.1038/168558a0 ↗
7. 10.1007/BF0111790910.1007/BF01117909 ↗
8. 10.1007/BF0055333910.1007/BF00553339 ↗
9. ZHU D. Y. · Ordnance Mater. Sci. Eng · 1998 · 21 · 22