journal article·2010-10

Characterisation of aluminium nanopowder produced by evaporation–condensation method

S. H. Hosseini, S. Sheibani, Z. Valefi

Materials Science and Technology· Volume 26· Issue 10
Publisher page

Abstract

In the present paper, aluminium nanoparticles were produced using evaporation of metal at high temperatures, 1500°C, and subsequent cooling in cold argon gas. The samples were characterised in terms of composition, morphology, structure, particle size and surface area using complementary techniques such as X-ray diffraction, scanning electron microscopy, electron dispersive spectroscopy and the Brunauer–Emmett–Teller method. It was found that the nanoparticles were covered by a crystalline oxide layer. In addition, the Brunauer–Emmett–Teller results showed that the produced nanoparticles reached an average diameter of 85 nm under modified condition. Thermal analysis showed that the reactivity was affected by average particle diameter, size distribution and crystallinity of passivating oxide layer. The produced aluminium nanoparticles were compared with the micrometre sized and commercially available aluminium explosive (Alex) nanopowder. Results showed that the reactivity of broad size distribution Alex nanopowder is analogous to the narrow size distribution produced nanopowder even though the average particle size is larger for the Alex nanopowder.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Energetic Materials and Combustion · High-Velocity Impact and Material Behavior · Laser-Ablation Synthesis of Nanoparticles

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Malek Ashtar University of TechnologyPO box 16765 3454, Tehran, Iran

School of Metallurgy and Materials EngineeringUniversity of Tehran, PO box 14395-1491, Tehran, Iran;, Email: Sheibani_s@engmail.ut.ac.ir

References (24)

Show source-provided references
1. Gleiter H. · Mater. Sci · 1989 · 223
2. Kearns M.: Mater. Sci. Eng. A, 2004, A375-377,120–126.10.1016/j.msea.2003.10.160 ↗
3. 10.1098/rstl.1857.001110.1098/rstl.1857.0011 ↗
4. Kodas T. T., and Hampden-Smith M. ‘Aerosol processing of materials’; 1999, New York, Wiley VCH.
5. 10.1016/S1359-0294(03)00007-410.1016/S1359-0294(03)00007-4 ↗
6. 10.1016/0965-9773(95)00046-110.1016/0965-9773(95)00046-1 ↗
7. 10.1016/S0965-9773(97)00226-210.1016/S0965-9773(97)00226-2 ↗
8. 10.1063/1.32287010.1063/1.322870 ↗
9. 10.1143/JJAP.12.167510.1143/JJAP.12.1675 ↗
10. 10.1016/S0965-9773(98)00149-410.1016/S0965-9773(98)00149-4 ↗
11. 10.1016/0965-9773(95)00292-M10.1016/0965-9773(95)00292-M ↗
12. 10.1002/prep.20029000610.1002/prep.200290006 ↗
13. 10.1023/A:102114022763910.1023/A:1021140227639 ↗
14. 10.1016/S0010-2180(02)00414-510.1016/S0010-2180(02)00414-5 ↗
15. Brown M. E. ‘Introduction to thermal analysis: techniques and applications’; 1998, London, Chapman and Hall.
16. Cullity B. D., and Stock S. R. ‘Elements of X-ray diffraction’, 3rd edn; 2001, Upper Saddle River, NJ, Prentice Hall.
17. Lipson H., and Steeple H. ‘Interpretation of X-ray powder diffraction patterns’; 1970, London, Macmillan.
18. 10.1016/S1359-6462(01)00757-610.1016/S1359-6462(01)00757-6 ↗
19. 10.1016/S0021-8502(97)00006-210.1016/S0021-8502(97)00006-2 ↗
20. 10.1007/BF0108367210.1007/BF01083672 ↗
21. 10.1016/j.jaerosci.2005.04.00110.1016/j.jaerosci.2005.04.001 ↗
22. 10.1016/j.combustflame.2004.10.01010.1016/j.combustflame.2004.10.010 ↗
23. 10.1016/j.tca.2006.03.00110.1016/j.tca.2006.03.001 ↗
24. 10.1016/j.tca.2007.07.00710.1016/j.tca.2007.07.007 ↗