Effect of notch root radius on fracture toughness of Ti–18Al–8Nb alloy
Source abstract
Abstract
The effect of notch root radius on the mode I fracture toughness of Ti–18Al–8Nb alloy in beta solution treated and water quenched condition was investigated. The apparent fracture toughness KIA was found to be independent of the notch root radius below a critical notch root radius ρ0 and subsequently increase linearly with the square root of notch root radius ρ1/2 beyond ρ0. The critical notch root radius in this alloy was found to be ∼50 μm. The results were explained on the basis of strain controlled fracture model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Schafric R. E.: Q. Rep., 1975, Project No. 70210170.
2. Sastry S. M. L., and Lipsitt H. A.: Proc. 4th Int. Conf. on Titanium (Titanium ‘80: science and technology’), (ed.Kimura H., and Izumi O.), Vol. 2, 1231-1244; 1980, New York, AIME.
3. Martin P. L., Lipsitt H. A., Nuhfer N. T., and Williams J. C.: Proc. 4th Int. Conf. on Titanium (Titanium ‘80: science and technology’), (ed.Kimura H., and Izumi O.), Vol. 2, 1245-1254; 1980, New York, AIME.
4. 10.1007/BF0267193310.1007/BF02671933 ↗
5. Banerjee D.: in Intermetallic compounds - principles and practice’, (ed.Westbrook J. H., and Fleisher R. L.), Vol. 2; 1994, London, John Wiley and Sons Ltd.
6. 10.1007/BF0265785310.1007/BF02657853 ↗
7. 10.1007/BF0264606410.1007/BF02646064 ↗
8. 10.1007/BF0266086410.1007/BF02660864 ↗
9. Chan K. S. · Proc. TMS Symp. on ‘Microstructure/ property relationships in titanium aluminides and titanium alloys’, (ed.
10. 10.1007/BF0280436710.1007/BF02804367 ↗
11. 10.1016/S1359-6454(97)00207-310.1016/S1359-6454(97)00207-3 ↗
12. 10.1016/0013-7944(68)90025-810.1016/0013-7944(68)90025-8 ↗
13. Crowe C. R., and Gray R. A.: in ‘Failure mechanisms in high performance materials’ (Proc. 39th Meeting High Performance Group), 157-166; 1984, Gaithesburg, NIST.
14. 10.1007/BF0096397510.1007/BF00963975 ↗
15. 10.1179/03071697580327733910.1179/030716975803277339 ↗
16. 10.1016/0956-716X(91)90443-510.1016/0956-716X(91)90443-5 ↗
17. 10.1016/0013-7944(77)90006-610.1016/0013-7944(77)90006-6 ↗
18. 10.1520/JTE11841J10.1520/JTE11841J ↗
19. 10.1016/0036-9748(89)90444-410.1016/0036-9748(89)90444-4 ↗
20. Paradkar A., Kumar V., Kamat S. V., Gogia A. K., and Kashyap B. P.: Mater. Sci. Eng. A, doi 10.1016/j.smea2007.10.005
21. ASTM: ‘Annual book of standards’, Vol. 3.01, ASTM E-399; 1997, Philadelphia, PA, ASTM.
22. Paradkar A. G., Kamat S. V., Gogia A. K., and Kashyap B. P.: Mater. Sci Eng. A, 2007, A456,292–299.10.1016/j.msea.2006.11.156 ↗
23. 10.1007/s11661-007-9432-y10.1007/s11661-007-9432-y ↗
24. 10.1016/0013-7944(71)90006-310.1016/0013-7944(71)90006-3 ↗
25. 10.1115/1.360120610.1115/1.3601206 ↗