journal article·2007-12

Microstructure study of particle reinforced AZ91D and AM50 magnesium alloy semisolid casting

M. Regev, H. Rosenson, Z. Koren

Materials Science and Technology· Volume 23· Issue 12
Publisher page

Abstract

Semisolid metal (SSM) casting offers a number of advantages compared to other casting processes such as reducing cast defects, eliminating dendritic morphology and improving microstructural uniformity. The high shear rate and turbulence involved in the SSM process can contribute to achieving a uniform distribution of the reinforcing phase when producing metal matrix composites (MMCs). Microstructure investigation of SiC particles reinforced AZ91D and AM50 produced by SSM was conducted by means of optical microscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy chemical analysis. Correlation between the process parameters and the microstructure was found. Microstructure stability was studied by performing aging experiments at 180°C, and the microstructure was found to be unstable, namely precipitation of secondary β(Mg17Al12) phase was detected. The instability of the microstructure can be explained on the basis of the solidification process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Koren Z., Rosenson H., and Gutman E. M.: Proc. 11th Eur. Conf. on ‘Composite materials’, Rhodes, Greece, May/June 2004, European Society for Composite Materials, Paper C068.
2. 10.1179/174328405X5182010.1179/174328405X51820 ↗
3. 10.1016/S0924-0136(02)00594-010.1016/S0924-0136(02)00594-0 ↗
4. 10.1016/S1471-5317(02)00026-310.1016/S1471-5317(02)00026-3 ↗
5. Jung H. C., and Shin K. S.: Mater. Sci. Forum, 2005, 475–479,517–520.10.4028/www.scientific.net/MSF.475-479.517 ↗
6. Koren Z. ‘Effect of die casting conditions on microstructure and properties of magnesium alloys injected in melted and semi solid states’, PhD thesis, Ben Gurion University of the Negev, Beer Sheva, Israel, 2003.
7. 10.1179/02670830110151048310.1179/026708301101510483 ↗
8. 10.1016/S0010-938X(02)00075-610.1016/S0010-938X(02)00075-6 ↗
9. Jun J. H., Park B. K., Kim J. M., Kim K. T., and Jung W. J.: Solid State Phenom., 2006, 116–117, 292–295.10.4028/www.scientific.net/SSP.116-117.292 ↗
10. Laurent V., Jarry P., Regazzoni G., and Apelian D.: J. Mater. Set,
11. 10.1016/j.matlet.2005.11.06510.1016/j.matlet.2005.11.065 ↗
12. Sasaki G., Yoshida M., Pan J., Fuyama N., T. Fujii and
13. Fukunaga H.: Mater. Sci. Forum, 2000, 350-351,215–220.10.4028/www.scientific.net/MSF.350-351.215 ↗
14. Sasaki G.: Mater. Sci Forum, 2003, 426-432,2015–2020. M. M. Adversian and H. Baker: ‘ASM speciality handbook magnesium and magnesium alloys'; 1999, Materials Park, OH, ASM International.10.4028/www.scientific.net/MSF.426-432.2015 ↗
15. Sasaki G., Yoshida M., Fuyama N., and Fujii T.: J. Mater. Process. Technol, 2002, 130-131,151–155.10.1016/S0924-0136(02)00712-4 ↗
16. Massalski T. D. ‘Binary alloy phase diagrams’, 2nd edn; 1990, Materials Park, OH, ASM International.
17. Finkel A., Regev M., Aghion E., Bamberger M., and Rosen A.: Proc. 1st Israeli Int. Conf. on ‘Magnesium science & technology’, Dead Sea, Israel, November 1997, Magnesium Research Institute (MRI), Beer-Sheeva,121–126.
18. 10.1007/s11661-001-0224-510.1007/s11661-001-0224-5 ↗
19. Regev M. · 1998
20. Porter D. A., and Easterling K. E. ‘Phase transformations in metals and alloys’, 2nd edn, 208-212; 2004, Boca Raton, FL, CRC Press Taylor & Francis Group.