Microstructure and micromechanism maps to optimise useful deformation processing conditions in magnesium alloy
Source abstract
Abstract
The present investigation examines the use of microstructure and micromechanism maps to develop a systematic understanding of the various microstructures that evolve in pure Mg and Mg–Al–Ce alloys during uniaxial compression deformation over a range of strain rates and temperatures. These maps further refine the safe deformation regimes that are predicted by dynamic materials modelling maps (or process modelling), which are based on efficiency of power dissipation for microstructure evolution η and the instability parameter Σ([Formula: see text] ). Operating mechanisms such as dynamic recrystallisation, cracking, twinning and grain coarsening are identified through careful microstructural analysis and mapped as a matrix at appropriate locations on a two-dimensional strain rate–temperature map. The study demonstrates that while conventional process maps delineate safe and unsafe working regimes based on power dissipation, it is the use of the microstructure and micromechanism maps in conjunction with the process maps that provide a more accurate and comprehensive picture of the processing window, which should be used for producing materials with certain defined end use. The process maps developed have been validated with a limited number of extrusion trials on pure Mg and Mg–Al–Ce alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Advanced Materials and Processes Research Institute (CSIR), Bhopal 462 064, India
India Science Lab, GM Global R&D, GM Technical Centre India Pvt Ltd, Bangalore 560 066, India
Materials and Processes Lab, GM Global R&D, 30500 Mound Road, Warren, MI 48090–9055, USA
References (53)
Show source-provided references
1. 10.1016/j.jmatprotec.2006.11.20710.1016/j.jmatprotec.2006.11.207 ↗
2. 10.1179/mst.1994.10.1.110.1179/mst.1994.10.1.1 ↗
3. in ‘Mg, Mg alloys: ASM specialty handbook’, 3–6; 1999, Materials Park, OH, ASM.
4. 10.1016/S0924-0136(01)00793-210.1016/S0924-0136(01)00793-2 ↗
5. Tsao LC · Z. Metallkd. · 2001 · 92 · 572
6. 10.1016/S0924-0136(03)00844-610.1016/S0924-0136(03)00844-6 ↗
7. 10.1361/105994906X15072210.1361/105994906X150722 ↗
8. 10.1007/s10853-005-1292-510.1007/s10853-005-1292-5 ↗
9. 10.1016/j.scriptamat.2008.05.01910.1016/j.scriptamat.2008.05.019 ↗
10. in ‘Metals handbook’, 9th edn, Vol. 14, 417–437; 1988, Materials Park, OH, ASM.
11. Prasad Y K R K, Sasidhara S, ed(eds.): ‘Hot working guide’, 1–24; 1997, Materials Park, OH, ASM.
12. McQueen HJ, Jonas JJ: in ‘Treatise on materials science technology: plastic deformation of materials’, Vol. 6, 394–493; 1975, New York, Academic Press Inc.
13. 10.1361/10599490332269242010.1361/105994903322692420 ↗
14. Prasad Y K R K, Sasidhara S: ‘Hot working guide’, 348–381; 1997, Materials Park, OH, ASM.
15. in ‘Metals handbook’, 1st edn, Vol. 20, 730–744; 1997, Materials Park, OH, ASM.
16. 10.3139/146.03125510.3139/146.031255 ↗
17. 10.3139/146.02091310.3139/146.020913 ↗
18. 10.1016/j.jmatprotec.2004.08.02710.1016/j.jmatprotec.2004.08.027 ↗
19. 10.1016/j.jmatprotec.2006.09.03310.1016/j.jmatprotec.2006.09.033 ↗
20. 10.1016/j.msea.2003.09.07810.1016/j.msea.2003.09.078 ↗
21. Sivakesavam O · Mater. Sci. Technol. · 1993 · 9 · 805
22. 10.1016/j.msea.2006.08.04410.1016/j.msea.2006.08.044 ↗
23. 10.1007/BF0266490210.1007/BF02664902 ↗
24. Polmear IJ: ‘Light alloys: metallurgy of the light metals’, 1st edn, 127–160; 1981, London, Edward Arnold Ltd.
25. 10.1016/S1471-5317(03)00012-910.1016/S1471-5317(03)00012-9 ↗
26. 10.1016/S1003-6326(06)60319-110.1016/S1003-6326(06)60319-1 ↗
27. in ‘Magnesium and magnesium alloys: ASM specialty handbook’, 1st edn, 26–28; 1999, Materials Park, OH, ASM.
28. 10.1016/j.msea.2006.06.10910.1016/j.msea.2006.06.109 ↗
29. 10.1007/s11661-010-0278-310.1007/s11661-010-0278-3 ↗
30. Asl KM · Mater. Sci. Eng. A · 2010 · 527 · 202710.1016/j.msea.2009.11.061 ↗
31. Qiu W · J. Mater. Sci, Technol. · 2009 · 25 · 356
32. 10.1007/s11771-006-0002-z10.1007/s11771-006-0002-z ↗
33. Keilbus A · J. Achiev. Mater. Manufact. Eng. · 2007 · 20 · 459
34. Rzychori T · J. Achiev. Mater. Manufact. Eng. · 2006 · 17 · 149
35. 10.1016/S0921-5093(99)00604-810.1016/S0921-5093(99)00604-8 ↗
36. Nayeb AA, Clarck JB: in ‘Phase diagram of binary magnesium alloys’, 78; 1988, Materials Park, OH, ASM.
37. in ‘Magnesium, magnesium alloys: ASM specialty handbook’, 1st edn, 12–25; 1999, Materials Park, OH, ASM.
38. 10.1179/mst.1996.12.9.74110.1179/mst.1996.12.9.741 ↗
39. Wu W, Luo AA, Jin L, Mishra RK, Sachdev AK, Ding W: GM research report, Microstructure and Mechanical Properties of Extruded Magnesium – Aluminium – Cerium Alloytubes, 2009, Report # CL-09-368MPL.
40. 10.1016/j.scriptamat.2004.03.02310.1016/j.scriptamat.2004.03.023 ↗
41. 10.1016/S0921-5093(02)00164-810.1016/S0921-5093(02)00164-8 ↗
42. Humphrey FJ, Hatherly M: ‘Recrystallization and related annealing phenomena’; 1996, Oxford, Pergamon.10.1016/B978-0-08-041884-1.50017-9 ↗
43. Kaibyshev RO · Phys. Met. Metall. · 1992 · 74 · 72
44. 10.1016/j.msea.2006.05.15910.1016/j.msea.2006.05.159 ↗
45. 10.1016/S0921-5093(01)01297-710.1016/S0921-5093(01)01297-7 ↗
46. Flynn PW · Trans. Met. Soc. AIME · 1961 · 221 · 1148
47. 10.1016/0001-6160(73)90141-710.1016/0001-6160(73)90141-7 ↗
48. 10.1016/j.matlet.2005.01.01210.1016/j.matlet.2005.01.012 ↗
49. 10.1007/s10853-005-0656-110.1007/s10853-005-0656-1 ↗
50. 10.1016/j.scriptamat.2006.07.01310.1016/j.scriptamat.2006.07.013 ↗
51. 10.1016/j.msea.2006.04.10310.1016/j.msea.2006.04.103 ↗
52. 10.1016/S1359-6462(97)00344-810.1016/S1359-6462(97)00344-8 ↗
53. 10.1016/0001-6160(82)90031-110.1016/0001-6160(82)90031-1 ↗