journal article·1993-11

Superplastic deformation and postformed mechanical properties of high temperature titanium alloy IMI 834

A. Wisbey, M. W. Kearns, P. G. Partridge, A. W. Bowen

Materials Science and Technology· Volume 9· Issue 11
Publisher page

Abstract

Superplastic forming is particularly attractive for high temperature Ti alloys because of the much lower forming stresses compared with those encountered during forging. The superplastic deformation parameters of IMI 834 sheet were obtained at 900, 940, and 990°C. At 990°C, IMI 834 shows low flow stresses, high values of strain rate sensitivity, and minimum strain anisotropy, however, 300% superplastic elongation was readily obtained at the lower forming temperature of 940°C but with a higher flow stress. A reduction in the room temperature and 600°C tensile properties with superplastic strain resulted from strain enhanced grain growth during superplastic deformation; this effect was greatest at 990°C. Aging of post 990°C superplastically formed material was studied. The creep performance of IMI 834 was found to be slightly reduced by superplastic forming. These properties and the changes in the microstructure and texture are compared with other Ti alloys under superplastic conditions.MST/1822
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. C. D. INGELBRECHT: PhD thesis, University of Surrey, 1985.
2. M. KEARNs; personal communication, IMI Titanium Ltd, Whitton, 1992.
3. T. B. MASSALSKI: ‘Binary alloy phase diagrams’; 1986, Metals Park, OH, ASM.
4. A. WISBEY, P. G. PARTRIDGE, and A. W. BOWEN: ‘The superplastic deformation of Ti6A14V extruded tube’, Technical Report 90060, Royal Aerospace Establishment, Farnborough, Hants, 1990.
5. 10.1179/mst.1991.7.1.6210.1179/mst.1991.7.1.62 ↗
6. COPE M. T. · J. Mater. Se · 1986, 21
7. SHAKESHEFF A. J. · J. Mater. Se · 1985, 20
8. McDARMAID D. S. · J. Mater. Se · 1525 · 1986, 21
9. INAGAKE H. · Z. Metallkd., · 1990 · 81 · 540
10. 10.1179/mst.1987.3.6.45510.1179/mst.1987.3.6.455 ↗
11. w. A. OSSA and D. M. ROYSTER: ‘Material characterization of superplastically formed titanium (Ti-6A1-2Sn-4Zr-2Mo) sheet’, Technical paper 2674, NASA, Washington, DC, 1987.
12. 10.1179/mst.1993.9.5.44110.1179/mst.1993.9.5.441 ↗