Crack restriction mechanism of thin wall metal parts fabricated by laser direct deposition shaping
Source abstract
Abstract
In order to restrict the generation and propagation of cracks in thin wall metal parts fabricated by laser direct deposition shaping method, using ‘element birth and death’ technique, a three-dimensional multitrack and multilayer thin wall model was developed, and the deposition process was simulated. Different scanning methods, including long edge parallel reciprocating scanning, short edge parallel reciprocating scanning and interlayer orthogonal parallel reciprocating scanning, were introduced. The effects of different substrate preheating temperatures were also researched. The von Mises equivalent stress and its X-, Y- and Z-directional principal stresses were analysed in detail. Under the same conditions used in the simulations, the deposition experiments were conducted, and the crack generation and restriction mechanism of thin wall metal parts were further discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Shanxi Key Laboratory of Fully Mechanized Coal Mining Equipment, Taiyuan 030024, China
School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China
References (26)
Show source-provided references
1. Koch J. · Adv. Powder. Metall. Part. Mater · 1996 · 4 · 107
2. 10.1007/s10019005013710.1007/s100190050137 ↗
3. 10.1016/S0924-0136(03)00663-010.1016/S0924-0136(03)00663-0 ↗
4. 10.1016/S0921-5093(03)00435-010.1016/S0921-5093(03)00435-0 ↗
5. 10.1016/S0143-8166(00)00072-510.1016/S0143-8166(00)00072-5 ↗
6. 10.1007/s12541-009-0016-110.1007/s12541-009-0016-1 ↗
7. 10.1007/s12541-010-0111-310.1007/s12541-010-0111-3 ↗
8. 10.1007/s12541-011-0125-510.1007/s12541-011-0125-5 ↗
9. 10.1016/j.phpro.2012.10.06010.1016/j.phpro.2012.10.060 ↗
10. Mohanty P. S. · Int. J. Mater. Prod. Technol · 1996 · 11 · 193
11. 10.1016/S0261-3069(99)00016-310.1016/S0261-3069(99)00016-3 ↗
12. 10.1023/A:102115351392510.1023/A:1021153513925 ↗
13. 10.1016/j.actamat.2005.05.00310.1016/j.actamat.2005.05.003 ↗
14. 10.1016/j.msea.2006.04.07910.1016/j.msea.2006.04.079 ↗
15. 10.1016/j.ijmachtools.2006.02.00410.1016/j.ijmachtools.2006.02.004 ↗
16. 10.1016/j.compind.2007.06.02110.1016/j.compind.2007.06.021 ↗
17. 10.1016/j.ijmachtools.2006.09.02210.1016/j.ijmachtools.2006.09.022 ↗
18. 10.1016/j.optlaseng.2007.06.01010.1016/j.optlaseng.2007.06.010 ↗
19. 10.1016/j.optlaseng.2009.06.01010.1016/j.optlaseng.2009.06.010 ↗
20. 10.1016/S0890-6955(01)00093-110.1016/S0890-6955(01)00093-1 ↗
21. Patil Rahul B. · Opt. Lasers Eng · 2007 · 47 · 1069
22. Roberts I. A. · Opt. Lasers Eng · 2009 · 49 · 916
23. Kai Z., Deepankar P., and Brent S. ‘A review of thermal analysis methods in laser sintering and selective laser melting’, Proc. 23rd Annual Int. Solid Freeform Fabrication Symp. – ‘An additive manufacturing conference’, Austin, TX, USA, August 2012, University of Texas, Paper 60 796–814.
24. Nachiket P., Deepankar P., and Brent S. ‘A new finite element solver using numerical Eigen modes for fast simulation of additive manufacturing processes’, Proc. 24th Annual Int. Solid Freeform Fabrication Symp. – ‘An additive manufacturing conference’, Austin, TX, USA, August 2013, University of Texas, Paper 43 535–548.
25. Kai Z., Deepankar P., Nachiket P., and Brent S. ‘A new dynamic mesh method applied to the simulation of selective laser melting’, Proc. 24th Annual Int. Solid Freeform Fabrication Symp. – ‘An additive manufacturing conference’, Austin, TX, USA, August 2013, University of Texas, Paper 44 549–559.
26. Long R.-S. · Trans. Nonferr. Met. Soc. China · 2008 · 19 · 528