Determination of residual stress within complex-shaped coarse-grained cobalt–chromium biomedical castings
Source abstract
Abstract
Cast ASTM F75 femoral knee implant components distort during manufacture due to residual stress re-distribution or inducement. These castings pose a number of challenges for residual stress determination methods; they have a complex geometry, their microstructure is inhomogeneous, they work-harden rapidly and they have a coarse, elastically anisotropic grain structure. The contour method is anticipated to be the most promising residual stress determination technique. X-ray diffraction is feasible for components which have experienced plastic deformation on their surface which results in refined diffracting domains. Centre-hole drilling is feasible, but the influence of stress induced from drilling and the effect of coarse grain structure is unknown. Neutron diffraction is challenging also due to a coarse grain structure and difficult nuclear material properties. This paper is part of a Themed Issue on Measurement, modelling and mitigation of residual stress.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Design and Manufacturing Technology & Materials and Surface Science Institute, University of Limerick, Limerick, Ireland
Funding
Irish Research Council for Science, Engineering and Technology · European Union's Seventh Framework Programme for research · DePuy (Ireland) MedCast · European Union’s Seventh Framework Programme · Seventh Framework Programme
References (100+)
Show source-provided references
1. 10.1787/health_glance-2013-38-en10.1787/health_glance-2013-38-en ↗
2. US Census Bureau: US and world population clock (31 December 2011). 2015, http://www.census.gov/popclock/ (accessed 16 April 2015).
3. 10.2106/JBJS.F.0022210.2106/JBJS.F.00222 ↗
4. Disegi J. A. · 1999
5. ASTM · 2012
6. 10.1007/s11837-005-0076-310.1007/s11837-005-0076-3 ↗
7. ASM International · 1992
8. ASTM · 2012
9. Prime M. B., and Steinzig M. L. ‘Beyond the streetlight effect: a united future for relaxation and diffraction methods for residual stress measurement,’ Adv. Mater. Res., 2014, 996, 234–242. doi: 10.4028/www.scientific.net/AMR.996.23410.4028/www.scientific.net/AMR.996.234 ↗
10. 10.1179/02670830110150998010.1179/026708301101509980 ↗
11. Kandil F. A. · 2001
12. 10.1016/j.crhy.2007.09.01510.1016/j.crhy.2007.09.015 ↗
13. 10.1016/j.matdes.2011.08.02210.1016/j.matdes.2011.08.022 ↗
14. Treuting R. G. · 1952
15. 10.1179/02670830110151008710.1179/026708301101510087 ↗
16. 10.1002/9781118402832.ch110.1002/9781118402832.ch1 ↗
17. 10.1016/j.msea.2013.05.05010.1016/j.msea.2013.05.050 ↗
18. 10.1016/j.msea.2011.03.09610.1016/j.msea.2011.03.096 ↗
19. 10.1016/S0167-577X(99)00021-X10.1016/S0167-577X(99)00021-X ↗
20. 10.1520/STP14267S10.1520/STP14267S ↗
21. Bhadeshia H. K. D. H. · 1987
22. Kaiser R. ‘Study of the effect of casting variables and heat treatment procedures on the microstructure and mechanical properties of Co–Cr–Mo biomedical alloy’, PhD thesis, University College Dublin, Dublin, 2013.
23. 10.1007/s11661-013-1825-510.1007/s11661-013-1825-5 ↗
24. 10.1016/j.jmbbm.2013.04.01310.1016/j.jmbbm.2013.04.013 ↗
25. 10.1007/s11661-007-9370-810.1007/s11661-007-9370-8 ↗
26. Davis J. R. · 2000 · 356
27. 10.1007/s11661-002-0054-010.1007/s11661-002-0054-0 ↗
28. 10.1016/j.matdes.2005.08.00410.1016/j.matdes.2005.08.004 ↗
29. 10.1016/j.matchar.2010.10.01110.1016/j.matchar.2010.10.011 ↗
30. Bedolla-Gill Y. · Rev. Mex. Fis. · 2009 · 55 · 1
31. 10.1007/s11661-011-0604-410.1007/s11661-011-0604-4 ↗
32. Kaiser R., Browne D. J., and Williamson K. ‘Investigation of the effects of cooling rate on the microstructure of investment cast biomedical grade Co alloys’, The ‘3rd International Conference on Advances in Solidification Processes’, Aachen, 2011, IOP Science.10.1088/1757-899X/27/1/012071 ↗
33. 10.1002/(SICI)1097-4636(199702)34:2<157::AID-JBM3>3.0.CO;2-P10.1002/(SICI)1097-4636(199702)34:2<157::AID-JBM3>3.0.CO;2-P ↗
34. 10.1016/j.jmbbm.2012.03.01310.1016/j.jmbbm.2012.03.013 ↗
35. Ghazvinizadeh H. · Int. J. Eng. · 2011 · 24 · 49
36. Harris K., and Sikkenga S. ‘Investment cast cobalt alloys’, ‘24th BICTA Conference on Investment Casting’, Oxford, 1999.
37. Beeley P. R. · 1980
38. 10.1201/978020340281810.1201/9780203402818 ↗
39. Carozza E. J., Burd L., and Miller E. R. ‘Anisotropic surgical prosthesis (EP 0145617A2)’, Patent, 1984.
40. 10.1002/978111996146810.1002/9781119961468 ↗
41. Pappas M. J., and Buechel F. ‘Prosthetic device with predetermined crystal orientation (EP 0163920A2)’, Patent, 1985.
42. Stefanescu D. M. · 2009
43. Dieter G. E. · 1988
44. 10.1063/1.37164710.1063/1.371647 ↗
45. Metal Suppliers Online: ‘430 F stainless steel material property data sheet’ [online], available at: http://www.suppliersonline.com/propertypages/430F.asp, 2016 [accessed 29 March 2016].
46. 10.1007/BF0054037410.1007/BF00540374 ↗
47. Sente Software Ltd. · 2014
48. Drozda T. J. · 1983
49. 10.1002/978111840283210.1002/9781118402832 ↗
50. Totten G. · 2002
51. Lu J. · 1996
52. Flavenot J. F. · 1996 · 35
53. Ueda Y. · 1996 · 35
54. 10.1016/B978-0-08-034062-3.50019-710.1016/B978-0-08-034062-3.50019-7 ↗
55. 10.1002/9781118402832.ch910.1002/9781118402832.ch9 ↗
56. Thompson R. B. · 1996
57. 10.1111/j.1747-1567.1992.tb00701.x10.1111/j.1747-1567.1992.tb00701.x ↗
58. Milbrandt K. P. · Proc. SESA · 1951 · 9 · 63
59. Schajer G. S. · 1996
60. HBM: Strain gauge catalogue. n.d. http://www.hbm.com/en/menu/products/strain-gauges/strain-gauge-catalog/ (accessed 27 August 2015).
61. 10.1002/9781118402832.ch410.1002/9781118402832.ch4 ↗
62. Cheng W. · 2007
63. 10.1002/9781118402832.ch310.1002/9781118402832.ch3 ↗
64. 10.1243/030932404189652410.1243/0309324041896524 ↗
65. ASTM · 2013
66. 10.1243/03093247JSA39310.1243/03093247JSA393 ↗
67. 10.31399/asm.hb.v10.a000176110.31399/asm.hb.v10.a0001761 ↗
68. 10.1016/B978-044482476-9/50014-110.1016/B978-044482476-9/50014-1 ↗
69. Vermeulen A. C. ‘An elastic constants database and XEC calculator for use in XRD residual stress analysis’, ‘Denver X-Ray Conference’, Colorado, 2001, ICDD.
70. ISO · 2005
71. BSI · 2008
72. Cullity B. D. · 2001
73. Kittel C. · 1996
74. 10.1002/mawe.1996027090710.1002/mawe.19960270907 ↗
75. Fitzpatrick M. E. · 2005
76. Noyan I. C. · 1987
77. ASTM · 2013
78. 10.1016/j.matchar.2015.04.01710.1016/j.matchar.2015.04.017 ↗
79. Sasaki T., and Kobayashi Y. ‘X-ray multiaxial stress analysis using two debye rings’, ‘Denver X-ray conference’, Colorado, 2008, ICDD.
80. 10.1007/978-94-011-2797-4_710.1007/978-94-011-2797-4_7 ↗
81. ISO · 2001
82. 10.1002/9781118402832.ch810.1002/9781118402832.ch8 ↗
83. Ohms C. ‘Residual stresses in thick bi-metallic fusion welds: a neutron diffraction study’, PhD thesis, Delft University of Technology, Delft, The Netherlands, 2013.
84. 10.1107/S160057671500275710.1107/S1600576715002757 ↗
85. 10.1016/j.msea.2005.02.02610.1016/j.msea.2005.02.026 ↗
86. 10.1107/S002188980604224510.1107/S0021889806042245 ↗
87. 10.1080/1044863920821877010.1080/10448639208218770 ↗
88. Grant P. V. · 2006
89. Vishay Precision Group: ‘Measurement of residual stresses by the hole-drilling strain gauge method – Technical note TN-503’, in 2010, http://www.vishaypg.com/docs/11053/tn503.pdf (accessed 07 July 2015).
90. Oettel R. · 2000
91. Chittey (Vishay) A.: Personal communication, 2013.
92. Serra Y., Ficquet X., and Kingston E. J. ‘Residual stress measurement using the hole drilling technique on components outside the ASTM E837 standard,’ Adv. Mater. Res., 2014, 996, 301–306. doi: 10.4028/www.scientific.net/AMR.996.30110.4028/www.scientific.net/AMR.996.301 ↗
93. Vishay Precision Group: ‘Special use sensors-residual stress strain gauges’, in 2010, http://www.vishaypg.com/docs/11516/resstr.pdf (accessed 07 July 2015).
94. 10.1007/s11340-014-9923-x10.1007/s11340-014-9923-x ↗
95. 10.1007/BF0232570010.1007/BF02325700 ↗
96. 10.1111/j.1747-1567.1986.tb01370.x10.1111/j.1747-1567.1986.tb01370.x ↗
97. 10.1111/j.1747-1567.1985.tb02036.x10.1111/j.1747-1567.1985.tb02036.x ↗
98. 10.1115/1.220495310.1115/1.2204953 ↗
99. 10.1115/1.134552610.1115/1.1345526 ↗
100. 10.1002/9781118402832.ch510.1002/9781118402832.ch5 ↗