Evolution of microstructures and texture in the surface layer of copper during burnishing process
Source abstract
Abstract
The evolution of microstructures and texture subjected to a burnishing process in pure copper was investigated by transmission electron microscopy and electron backscattered diffraction. The grains of the top surface underwent significant refinement with a minimum grain size of ∼100 nm. The grain refinement was dominated by dislocation activities, including formation of dislocation cells, transformation of cell walls into sub-grain boundaries, development of highly disoriented sub-boundaries and generation of equiaxed grains. Shear strain induced by friction affected the strain state at the first pass of burnishing, resulting in a {001}<110> shear texture. Brass orientation developed well at the early stage of burnishing. Then, with a further increase in plastic strain, Brass orientation decreased, while the Goss orientation was observed, which mainly owing to the transformation from Brass to Goss orientation by rotation along the α-fibre. Moreover, dynamic recrystallisation occurred as the strain increased.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Aerospace Materials and Performance (Ministry of Education) School of Materials Science and Engineering, Beihang University, Beijing, China
References (30)
Show source-provided references
1. 10.1016/S0890-6955(00)00019-510.1016/S0890-6955(00)00019-5 ↗
2. 10.1016/j.matchemphys.2010.07.07010.1016/j.matchemphys.2010.07.070 ↗
3. 10.1016/j.ijfatigue.2004.01.01010.1016/j.ijfatigue.2004.01.010 ↗
4. 10.1016/S0924-0136(98)00058-210.1016/S0924-0136(98)00058-2 ↗
5. 10.1016/j.jmatprotec.2004.09.07810.1016/j.jmatprotec.2004.09.078 ↗
6. 10.1016/j.jmatprotec.2011.09.01710.1016/j.jmatprotec.2011.09.017 ↗
7. 10.1016/j.matchemphys.2010.07.07010.1016/j.matchemphys.2010.07.070 ↗
8. 10.1016/j.ijplas.2005.04.00610.1016/j.ijplas.2005.04.006 ↗
9. 10.1016/j.scriptamat.2011.06.01310.1016/j.scriptamat.2011.06.013 ↗
10. 10.1016/j.scriptamat.2005.01.02610.1016/j.scriptamat.2005.01.026 ↗
11. 10.1016/S0921-5093(03)00069-810.1016/S0921-5093(03)00069-8 ↗
12. 10.1166/nnl.2013.153910.1166/nnl.2013.1539 ↗
13. 10.1016/j.apsusc.2013.02.01210.1016/j.apsusc.2013.02.012 ↗
14. 10.1016/j.actamat.2006.07.01310.1016/j.actamat.2006.07.013 ↗
15. 10.1016/j.actamat.2004.05.02310.1016/j.actamat.2004.05.023 ↗
16. 10.1016/j.apsusc.2008.10.03710.1016/j.apsusc.2008.10.037 ↗
17. 10.1016/j.msea.2012.11.01710.1016/j.msea.2012.11.017 ↗
18. 10.1016/j.scriptamat.2007.11.03510.1016/j.scriptamat.2007.11.035 ↗
19. 10.1016/j.msea.2008.12.01810.1016/j.msea.2008.12.018 ↗
20. 10.1080/0141861010821665910.1080/01418610108216659 ↗
21. 10.1016/j.actamat.2004.06.04010.1016/j.actamat.2004.06.040 ↗
22. 10.1016/j.actamat.2006.07.00810.1016/j.actamat.2006.07.008 ↗
23. 10.1016/S1359-6454(03)00433-610.1016/S1359-6454(03)00433-6 ↗
24. 10.4028/www.scientific.net/MSF.503-504.2510.4028/www.scientific.net/MSF.503-504.25 ↗
25. 10.1016/j.scriptamat.2013.02.05310.1016/j.scriptamat.2013.02.053 ↗
26. 10.1016/j.actamat.2008.12.00210.1016/j.actamat.2008.12.002 ↗
27. Khaled J · J. Eng. Mater. Technol. · 2012 · 134 · 1
28. 10.1016/j.jmatprotec.2005.03.04110.1016/j.jmatprotec.2005.03.041 ↗
29. 10.1016/j.matchar.2010.12.00410.1016/j.matchar.2010.12.004 ↗
30. 10.1016/j.actamat.2008.04.02210.1016/j.actamat.2008.04.022 ↗