Ferrite recrystallisation and characteristics of non-recrystallised ferrite grains in Ti added low carbon steels
Source abstract
Abstract
The progress of ferrite recrystallisation in low carbon steel was slower than in ultralow carbon steel. The hardness of the non-recrystallised ferrite grains gradually decreased with increasing annealing time in ultralow carbon steel, but gradually increased with increasing annealing time in low carbon steel. The amount of Ti containing precipitates increased slightly during annealing in ultralow carbon steel, but increased remarkably with increasing annealing time in low carbon steel. These results suggest that the softening of non-recrystallised ferrite grains during annealing in ultralow carbon steel may reflect the progress of recovery and the Ostwald ripening of Ti containing precipitates formed during annealing. In contrast, the hardening of non-recrystallised ferrite grains in low carbon steel may be due to the precipitation hardening of TiC formed during annealing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Kisarazu National College of Technology, 2-11-1 Kiyomidai-higashi, Kisarazu-shi, Chiba 292-0041, Japan
References (28)
Show source-provided references
1. 10.1155/TSM.3.5310.1155/TSM.3.53 ↗
2. Garcia CI · Mater. Sci. Technol. · 2005 · 2 · 77
3. Hayami S, Furukawa T, Gondoh H and Takachi H: ‘Formable HSLA and dual-phase steels’, in Formable HSLA and Dual-Phase Steels, 167; 1979, New York, AIME.
4. GoodmanSR: ‘Metallurgy of high-strength cold-rolled steel sheets’, Conf. Proc. Int. Conf. on ‘Technology and applications of HSLA steels’, 1984, 239–252, OH, ASM.
5. Michalak JT · Trans. ASM · 1961 · 53 · 331
6. Venturello G · Trans. Metal. Soc. AIME · 1963 · 227 · 1433
7. Rosen A · Trans. Metal. Soc. AIME · 1964 · 230 · 205
8. 10.1016/0001-6160(70)90107-010.1016/0001-6160(70)90107-0 ↗
9. 10.1007/BF0259543410.1007/BF02595434 ↗
10. 10.1016/S1359-6454(97)00046-310.1016/S1359-6454(97)00046-3 ↗
11. 10.2355/isijinternational.38.54710.2355/isijinternational.38.547 ↗
12. 10.1016/S0921-5093(01)01715-410.1016/S0921-5093(01)01715-4 ↗
13. 10.4028/www.scientific.net/MSF.467-470.109910.4028/www.scientific.net/MSF.467-470.1099 ↗
14. Maruyama N · Nippon Steel Techn. Rep. · 2005 · 91 · 34
15. 10.2355/isijinternational.37.80710.2355/isijinternational.37.807 ↗
16. 10.2355/isijinternational.38.61710.2355/isijinternational.38.617 ↗
17. 10.4028/www.scientific.net/MSF.467-470.18310.4028/www.scientific.net/MSF.467-470.183 ↗
18. 10.1016/j.msea.2005.05.09310.1016/j.msea.2005.05.093 ↗
19. 10.1016/j.scriptamat.2005.06.02510.1016/j.scriptamat.2005.06.025 ↗
20. 10.2355/tetsutohagane.94.17910.2355/tetsutohagane.94.179 ↗
21. 10.1016/j.msea.2012.11.08310.1016/j.msea.2012.11.083 ↗
22. 10.2355/tetsutohagane1955.68.9_134810.2355/tetsutohagane1955.68.9_1348 ↗
23. 10.2355/tetsutohagane1955.72.11_172810.2355/tetsutohagane1955.72.11_1728 ↗
24. 10.2355/tetsutohagane1955.70.15_188810.2355/tetsutohagane1955.70.15_1888 ↗
25. 10.2355/tetsutohagane1955.70.15_190610.2355/tetsutohagane1955.70.15_1906 ↗
26. 10.2355/isijinternational.34.31310.2355/isijinternational.34.313 ↗
27. Orowan E: ‘Dislocation in metals’, 131; 1954, New York, AIME.
28. 10.1002/pssb.1966016023410.1002/pssb.19660160234 ↗