journal article·2016-09

Numerical and experimental investigation of thickness effect on residual stress measurement

K. Zhang, Y. Zhou, S. Zhao, J. Chen

Materials Science and Technology· Volume 32· Issue 14
Publisher page

Abstract

This article studies the effect of thickness on residual stress measurements both numerically and experimentally. First, the released strain of aluminium specimens with different thicknesses subjected to incremental hole drilling is analysed using an efficient finite element model. From these results, the cumulative calibration coefficients and their variations as a function of plate thickness are determined. Then, the residual stress profile of a 1-mm-thick aluminium plate subjected to incremental hole drilling is investigated by in-plane three-directional moiré interferometry. A comparative study between the principle stress data calculated using the special calibration coefficients that match the thickness and the general ASTM calibration coefficients that are designed for thick plates is carried out. The analysis results demonstrate that the thickness significantly influenced the release strain. Moreover, the mismatch between the calibration coefficients and the thicknesses results in a deviation in the stress data of more than 10%, and the deviation increases with decreasing thickness. This paper is part of a Themed Issue on Measurement, modelling and mitigation of residual stress.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering Mechanics, Shanghai Jiao Tong University, 800 Dongchuan RD, Minhang District, Shanghai 200240, China

MOE Key Laboratory of Hydrodynamics, Shanghai Jiao Tong University, Shanghai 200240, China

Funding

National Natural Science Foundation of China

References (42)

Show source-provided references
1. 10.1016/S1359-6454(98)00014-710.1016/S1359-6454(98)00014-7 ↗
2. 10.1063/1.36595610.1063/1.365956 ↗
3. 10.1179/02670830110151008710.1179/026708301101510087 ↗
4. 10.1088/0034-4885/70/12/R0410.1088/0034-4885/70/12/R04 ↗
5. 10.1002/978111840283210.1002/9781118402832 ↗
6. 10.1179/026708310X1281599241845410.1179/026708310X12815992418454 ↗
7. 10.1016/0924-0136(94)01733-H10.1016/0924-0136(94)01733-H ↗
8. 10.1179/174328407X21311610.1179/174328407X213116 ↗
9. 10.1179/1743284712Y.000000010610.1179/1743284712Y.0000000106 ↗
10. 10.1179/1743284713Y.000000022210.1179/1743284713Y.0000000222 ↗
11. 10.1179/1743284713Y.000000022310.1179/1743284713Y.0000000223 ↗
12. Hutchings M. T. · 2012
13. Prevey P. S. ‘‘X-ray diffraction residual stress techniques’, ASM International, ASM Handbook, Vol. 10, 380–392; 1986, American Society for Metals.10.31399/asm.hb.v10.a0001761 ↗
14. Hilley M. · 1980
15. 10.1016/S0143-8166(97)89899-510.1016/S0143-8166(97)89899-5 ↗
16. 10.1016/S0143-8166(95)00014-310.1016/S0143-8166(95)00014-3 ↗
17. 10.1007/s11340-009-9317-710.1007/s11340-009-9317-7 ↗
18. 10.1177/030932471559095710.1177/0309324715590957 ↗
19. 10.1007/BF0242816610.1007/BF02428166 ↗
20. Kandil F., Lord J., Fry A., and Grant P. ‘A review of residual stress measurement methods—a guide to technique selection’, NPL, Report MATC (A), 2001, 4.
21. 10.1179/02670830110150998010.1179/026708301101509980 ↗
22. 10.1016/S0894-9166(14)60002-110.1016/S0894-9166(14)60002-1 ↗
23. 10.1016/j.matdes.2011.08.02210.1016/j.matdes.2011.08.022 ↗
24. 10.1007/s11340-009-9329-310.1007/s11340-009-9329-3 ↗
25. Noyan I. C. · 2013
26. 10.1179/174328405X1410010.1179/174328405X14100 ↗
27. 10.1007/s11661-997-0101-y10.1007/s11661-997-0101-y ↗
28. 10.1115/1.322605910.1115/1.3226059 ↗
29. 10.1115/1.322606010.1115/1.3226060 ↗
30. ASTM: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method: ASTM International, West Conshohocken, PA, E837-13a ed., 2013.
31. ASTM: Standard Test Method for Determining Residual Stresses by the Hole Drilling Strain Gage method: ASTM International, West Conshohocken, PA, E837-08 ed., 2008.
32. 10.1115/1.292904310.1115/1.2929043 ↗
33. 10.1111/j.1747-1567.1995.tb00867.x10.1111/j.1747-1567.1995.tb00867.x ↗
34. Measurements V. M.: Measurement of residual stresses by the hole drilling strain gage method’: Tech. Rep., Tech Note TN-503-6, 2007.
35. 10.1163/156855104258018110.1163/1568551042580181 ↗
36. 10.1111/j.1475-1305.2009.00653.x10.1111/j.1475-1305.2009.00653.x ↗
37. 10.1007/s11433-013-5256-510.1007/s11433-013-5256-5 ↗
38. 10.1115/1.141668510.1115/1.1416685 ↗
39. 10.1007/BF0232636510.1007/BF02326365 ↗
40. 10.1016/0143-8166(90)90011-W10.1016/0143-8166(90)90011-W ↗
41. 10.1007/s10409-008-0224-410.1007/s10409-008-0224-4 ↗
42. 10.1088/0026-1394/2/1/00510.1088/0026-1394/2/1/005 ↗