journal article·2009-06

Formation of nickel aluminide/nickel hybrid coatings on alloy steels by two step process of nickel plating and low temperature pack aluminisation

Z. D. Xiang, P. K. Datta

Materials Science and Technology· Volume 25· Issue 6
Publisher page

Abstract

The present study investigates the conditions required for forming a hybrid coating consisting of an outer nickel aluminide layer and an inner nickel layer on alloy steels. A commercial alloy steel of 9Cr–1Mo was used as a substrate. Electroless and electronickel plating processes were used to form an initial nickel layer on the steel. The AlCl3 activated packs containing pure Al as a depositing source were then used to aluminise the nickel deposit at temperatures ≤650°C. The effect of phosphorus or boron content in the initial nickel layer deposited with the electroless nickel plating solutions using hypophosphite or boron–hydrogen compound as reducing agent was investigated in relation to the spallation tendency of the coating either immediately after the aluminising process or during the thermal annealing post-aluminising process. Under the aluminising conditions used, the outer nickel aluminide layer formed was Ni2Al3. For the electroplated nickel deposit, the growth kinetics of the outer Ni2Al3 layer during the pack aluminising process was found to obey the parabolic rate law with a parabolic rate constant being 12·67 μm at 650°C for 2 wt-%AlCl3 activated pack containing 4 wt-% pure Al as a deposition source.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials and MetallurgyWuhan University of Science and Technology, Wuhan 430081, China, School of Computing, Engineering and Information Sciences, Northumbria University, Ellison Building, Ellison Place, Newcastle upon Tyne NE1 8ST, UK;; zhidongxiang@hotmail.com, Email: z.xiang@northumbria.ac.uk

School of ComputingEngineering and Information Sciences, Northumbria University, Ellison Building, Ellison Place, Newcastle upon Tyne NE1 8ST, UK

References (16)

Show source-provided references
1. Mayer K.H. ‘New ferritic steels for advanced power stations’, Proc. Int. Conf. on ‘Condition and life management for power plants’, (ed.Hietanen S., and Auerkari P.), Provoo, Finland, June 2001, VTT,11–34.
2. 10.1361/10599490177034539410.1361/105994901770345394 ↗
3. 10.1038/nature0174010.1038/nature01740 ↗
4. 10.1007/s10853-006-0806-010.1007/s10853-006-0806-0 ↗
5. Agüero A. · Technol · 2005 · 200 · 1219
6. Aguero A., Garciade Blas J., Muelas R., Sanchez A., and Tripas S.: Mater. Sci. Forum, 2001, 369-372,939–946.10.4028/www.scientific.net/MSF.369-372.939 ↗
7. Xiang Z. D., and Datta P. K.: Acta Mater. 2006, 54, 4453–4463.10.1016/j.actamat.2006.05.032 ↗
8. Xiang Z. D. · Technol · 2004 · 184 · 108
9. 10.1016/j.surfcoat.2006.11.03310.1016/j.surfcoat.2006.11.033 ↗
10. Zhang Y., Pint B. A., Garner G. W., Cooley K. M., and Haynes J. A.: Surf Coat. Technol, 2004, 188-189,35–40.10.1016/j.surfcoat.2004.07.090 ↗
11. 10.1016/S0079-6425(97)00014-510.1016/S0079-6425(97)00014-5 ↗
12. Goward G. W.: Surf Coat. Technol, 1998, 108-109,73–79.10.1016/S0257-8972(98)00667-7 ↗
13. 10.1023/A:101253422016510.1023/A:1012534220165 ↗
14. Saroja S., Parameswaran P., Vijayalakshmi M., and Raghunathan V. S.: Acta Mater. 1995, 43, 2985–3000.10.1016/0956-7151(95)00022-N ↗
15. Ennis P. J., Zielinska-Lipiec A., Wachter O., and Czyrska-Filemonowicz A.: Acta Mater. 1997, 45, (12), 4901–4907.10.1016/S1359-6454(97)00176-6 ↗
16. Janssen M. M. P. · Trans. Metall. Soc. AIME · 1967 · 239 · 1372