journal article·1994-05

Processing map for hot working of Ni–16Cr–8Fe alloy (IN 600)

N. Srinivasan, Y. V. R. K. Prasad

Materials Science and Technology· Volume 10· Issue 5
Publisher page

Abstract

The hot deformation characteristics of IN 600 nickel alloy are studied using hot compression testing in the temperature range 850–1200°C and strain rate range 0·001–100 s−l. A processing map for hot working is developed on the basis of the data obtained, using the principles of dynamic materials modelling. The map exhibits a single domain with a peak efficiency of power dissipation of 48% occurring at 1200°C and 0·2 s−1, at which the material undergoes dynamic recrystallisation (DRX). These are the optimum conditions for hot working of IN 600. At strain rates higher than 1 s−1, the material exhibits flow localisation and its microstructure consists of localised bands of fine recrystallised grains. The presence of iron in the Ni–Cr alloy narrows the DRX domain owing to a higher temperature required for carbide dissolution, which is essential for the occurrence of DRX. The efficiency of DRX in Ni–Cr is, however, enhanced by iron addition.MST/1856
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. C. T. SIMS and w. C. HAGEL: 'The superalloy'; 1972, New York, Wiley Interscience.
2. 10.1016/0022-3115(77)90026-510.1016/0022-3115(77)90026-5 ↗
3. H. J. McQUEEN and J.J. JONAS: in 'Treatise on materials science and technology', (ed. R. J. Arsenault), Vol. 6, 393–493; 1975, New York, Academic Press.10.1016/B978-0-12-341806-7.50014-3 ↗
4. 10.1179/03071697980327611010.1179/030716979803276110 ↗
5. JOHNSTON H. S. · Met. Prog. · 1973 · 103 · 62
6. 10.1007/BF0266490210.1007/BF02664902 ↗
7. H. L. GEGEL, J. MALAS, S. M. DORAIVELU, and V. A. SHENDE: in 'Metals handbook', 9 edn, Vol. 14, 417–438; 1987, Metals Park, OH, ASM.
8. J. M. ALEXANDER: in ‘Modelling of hot deformation of steels', (ed. J. C. Lenard), 101–114; 1984, Berlin, Springer-Verlag.
9. H. ZIEGLER: in 'Progress in solid mechanics', (ed. I. N. Sneddon and R. Hill, Vol. 4, 93–193; 1963, Amsterdam, North-Holland.
10. PRASAD Y. V. R. K. · Indian J. Technol. · 1990 · 28 · 435
11. 10.1179/mst.1992.8.3.20610.1179/mst.1992.8.3.206 ↗
12. 10.1016/0921-5093(92)90151-P10.1016/0921-5093(92)90151-P ↗
13. 10.1016/0956-716X(92)90517-I10.1016/0956-716X(92)90517-I ↗
14. 10.1007/BF0265176210.1007/BF02651762 ↗
15. 10.1016/0924-0136(94)90005-110.1016/0924-0136(94)90005-1 ↗
16. SHETTY M. N. · Z. Metallkd. · 1989 · 6 · 397
17. SRINIVASAN N. · Mater
18. MONMA K. · J. Jpn Inst. Met. · 1964 · 28 · 18810.2320/jinstmet1952.28.4_188 ↗