journal article·2007-01

Influence of nitride formers on strength and impact behaviour of hot rolled steel

B. Mintz, A. Williamson, H. Su, W. B. Morrison

Materials Science and Technology· Volume 23· Issue 1
Publisher page

Abstract

The extent to which the nitride formers B, Zr, Ti and Al can be used to improve the properties of C–Mn hot rolled steels has been investigated. Of these nitride formers, a high aluminium addition, ∼0·2%, was the most effective, giving extremely good impact properties with no loss in strength. An impact transition temperature as low as −100°C can be obtained with this Al addition in a silicon killed 0·1%C, 1·4%Mn steel. It is believed that the aluminium may be behaving in a similar manner to silicon and that the improvement in impact behaviour is most likely due to a reduction in the gradient of the Hall–Petch strength–impact relationship, i.e. the ky value, owing to the removal of the interstitials which segregate to the ferrite grain boundaries. Further work is required to examine this hypothesis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Frazier R. H. · J. Met · 1956 · 1269
2. Smith C. I. · Met. Technol · 1978 · 341 · 0
3. 10.4028/www.scientific.net/MSF.426-432.121910.4028/www.scientific.net/MSF.426-432.1219 ↗
4. Mintz B.: Proc. Int. Conf. on ‘TRIP-aided high strength ferrous alloys’, (ed. B. C. De Cooman), 379-382; 2002, Ghent.
5. 10.1179/03071697980327624610.1179/030716979803276246 ↗
6. Mintz B.: Proc. 6th Int. Conf. on ‘Fracture’, (ed.Valluri S. R. et al),Vol. 2, 1247-1254; 1984, New Delhi, India, Advances in Fracture Research, Pergamon Press.10.1016/B978-1-4832-8440-8.50110-1 ↗
7. 10.1179/mst.1986.2.10.104610.1179/mst.1986.2.10.1046 ↗
8. Mintz B. · Ironmaking Steelmaking · 1994 · 21 · 215
9. 10.1179/03071698480327476510.1179/030716984803274765 ↗
10. Little J. H., and Henderson W. L. M.: in ‘Effect of second phase particles on the mechanical properties of steels’, 182; 1971, 1ST.
11. Leroy V., and Herman J. C.: Proc. Conf. Microalloying'95, (ed.Korchynski M. et al), 213-223; 1995, Warrendale, PA, ISS.
12. 10.1179/mst.1985.1.7.52010.1179/mst.1985.1.7.520 ↗
13. Morrison W. B., Mintz B., and Cochrane R. C.: Proc. Product Technology Conf. on ‘Controlled processing of HSLA steels’, York, UK, 1976, University of York, Paper 1.
14. Mintz B. · J. Iron Steel Inst · 1973 · 211 · 433
15. Mintz B. · Scand. J. Metall · 1972 · 1 · 279
16. 10.1007/BF0266194310.1007/BF02661943 ↗
17. 10.1179/03071698480327469310.1179/030716984803274693 ↗
18. 10.1179/mst.1992.8.6.53710.1179/mst.1992.8.6.537 ↗
19. 10.1007/BF0264638310.1007/BF02646383 ↗
20. Thomas G., and Koo J. Y.: in ‘Structure and properties of dual phase steels’, (ed.Kot R. A., and Morris J. W.), 183-201; 1979, New York, AIME.
21. 10.4028/www.scientific.net/MSF.284-286.21710.4028/www.scientific.net/MSF.284-286.217 ↗
22. 10.1179/02670830010150710910.1179/026708300101507109 ↗