journal article·2012-05

Investigation on fatigue property of three-dimensional reticulated porous metal foams

P S Liu, H Y Du

Materials Science and Technology· Volume 28· Issue 5
Publisher page

Abstract

As widely used new engineering materials, porous metal foams are often subject to fatigue. In the present paper, the fatigue property of three-dimensional (3D) reticulated porous metal foams has been studied in a new way. The analytical model of fatigue has been put forward based on the simplified structure of these reticulated porous materials under cyclic loads, and a direct relationship between the index weighing the fatigue property and the porosity has been presented for porous materials. The relationship indicates that the fatigue property of porous bodies under controlled nominal stress amplitudes gets worse with increasing porosity, and under controlled nominal strain amplitudes gets better with increasing porosity and decreasing pore diameter. The cyclic compression–compression test for fatigue under controlled nominal stress amplitudes and the cyclic bending test for fatigue under controlled nominal strain amplitudes were performed on the nickel foam produced by electrodeposition, a typical 3D reticulated material, and the abovementioned relationship was experimentally proved to be practical with the response of the electrical resistivity to fatigue damage. The corresponding data of aluminium foam also show similar results in the stress fatigue property.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Nanoporous metals and alloys · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Beam Technology and Material Modification of Ministry of Education College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875, China

Research Institute of Jilin Electric Power Company Limited Changchun 130021, China

References (29)

Show source-provided references
1. Gibson LJ, Ashby MF: ‘Cellular solids: structure and properties’, (transl. P. S. Liu and M. B. Tian, Jr); 2003, Beijing, Tsinghua University Press.
2. 10.1016/S0079-6425(00)00002-510.1016/S0079-6425(00)00002-5 ↗
3. 10.1023/A:101248392062810.1023/A:1012483920628 ↗
4. 10.1126/science.107856010.1126/science.1078560 ↗
5. Davis ME · Nature · 2002 · 417 · 83110.1038/nature00785 ↗
6. Liu PS: ‘Introduction to porous materials’; 2004, Beijing, Tsinghua University Press.
7. 10.1080/0950083080230201410.1080/09500830802302014 ↗
8. Hamiuddin M · Powder Metall. Int. · 1986 · 18 · 73
9. Ashby MF, Evans A, Fleck NA, Gibson LJ, Hutchinson JW, Wadley HNG: ‘Metal foams: a design guide’; 2000, Boston, MA, Elsevier Science.10.1115/1.1421119 ↗
10. 10.1016/S0921-5093(00)00623-710.1016/S0921-5093(00)00623-7 ↗
11. Liu PS · J. Adv. Mater. · 2000 · 32 · 9
12. 10.1016/S0921-5093(00)00954-010.1016/S0921-5093(00)00954-0 ↗
13. 10.1016/S0921-5093(00)00898-410.1016/S0921-5093(00)00898-4 ↗
14. 10.1016/S0921-5093(02)00360-X10.1016/S0921-5093(02)00360-X ↗
15. 10.1016/S0921-5093(04)00814-710.1016/S0921-5093(04)00814-7 ↗
16. Liu PS · 2007 · 81
17. 10.1016/j.matdes.2006.10.01810.1016/j.matdes.2006.10.018 ↗
18. 10.1016/j.matdes.2008.07.01610.1016/j.matdes.2008.07.016 ↗
19. 10.1016/j.msea.2005.02.05210.1016/j.msea.2005.02.052 ↗
20. 10.1016/j.msea.2006.10.08010.1016/j.msea.2006.10.080 ↗
21. Huang PY: ‘Principles of powder metallurgy’; 1997, Beijing, Metallurgical Industry Press.
22. 10.1016/j.msea.2008.11.05910.1016/j.msea.2008.11.059 ↗
23. 10.1016/j.matdes.2009.10.00710.1016/j.matdes.2009.10.007 ↗
24. 10.1016/0378-7753(81)80022-510.1016/0378-7753(81)80022-5 ↗
25. 10.1016/0378-7753(81)80037-710.1016/0378-7753(81)80037-7 ↗
26. 10.1016/S0921-5093(00)01033-910.1016/S0921-5093(00)01033-9 ↗
27. 10.1016/j.actamat.2007.11.00410.1016/j.actamat.2007.11.004 ↗
28. 10.1016/j.msea.2008.10.04510.1016/j.msea.2008.10.045 ↗
29. 10.1002/(SICI)1527-2648(200004)2:4<215::AID-ADEM215>3.0.CO;2-F10.1002/(SICI)1527-2648(200004)2:4<215::AID-ADEM215>3.0.CO;2-F ↗