Effect of molybdenum on microstructure and mechanical properties of intercritically annealed and isothermally transformed low carbon steel
Source abstract
Abstract
The effects of Mo on microstructure and deformation behaviour of intercritically annealed (760°C) and isothermally transformed (400 and 450°C) steels were studied using three alloys containing from 0 to 0·14 wt-%Mo and 0·1 wt-%C, 1·2 wt-%Si, and 1·5 wt-%Mn. Tensile specimens were tested at temperatures between −80 and 120°C. With the addition of Mo, hardenability increases and constant amounts (about 8 vol.-%) of austenite are retained in the microstructure independent of heat treatment conditions. A range of mechanical properties, which depended on alloying, microstructure, and testing temperature, was achieved. The optimum combinations of ultimate tensile strength and elongation, 700 MN m−2 and 34% and 620 MN m−2 and 39%, for the 0·14 wt-%Mo and Mo free steels, respectively, were obtained when significant amounts of retained austenite transform by strain induced mechanisms at high strains, increasing strain hardening and deferring necking to higher strains.MST/1508
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. 10.2355/isijinternational1966.27.57010.2355/isijinternational1966.27.570 ↗
2. 10.1016/0036-9748(87)90103-710.1016/0036-9748(87)90103-7 ↗
3. 10.1007/BF0265681610.1007/BF02656816 ↗
4. 10.1007/BF0265392310.1007/BF02653923 ↗
5. SUGIMOTO K. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1990 · 76 · 135610.2355/tetsutohagane1955.76.8_1356 ↗
6. 10.1007/BF0266505310.1007/BF02665053 ↗
7. 10.1007/BF0266505410.1007/BF02665054 ↗
8. KULIN S. A. · J. Met., · 1952 · 4 · 661
9. 10.1016/0001-6160(53)90083-210.1016/0001-6160(53)90083-2 ↗
10. ANGEL T. · J. Iron Steel Inst., · 1954 · 177 · 165
11. LUDWIGSON D. C. · J. Iron Steel Inst., · 1969 · 207 · 63
12. SANDERSON G. P. · J. Iron Steel Inst., · 1969 · 207 · 1129
13. 10.1007/BF0267230110.1007/BF02672301 ↗
14. 10.1115/1.344353010.1115/1.3443530 ↗
15. 10.1007/BF0264442710.1007/BF02644427 ↗
16. 10.1007/BF0264200310.1007/BF02642003 ↗
17. 10.1007/BF0264740610.1007/BF02647406 ↗
18. ZACKAY V. F. · Trans. ASM · 1967 · 60 · 252
19. TAMURA I. · Trans. Iron Steel Inst. Jpn · 1970 · 10 · 16310.2355/isijinternational1966.10.163 ↗
20. 10.1007/BF0265992810.1007/BF02659928 ↗
21. 10.1007/BF0266194610.1007/BF02661946 ↗
22. 10.1179/03071698080328664910.1179/030716980803286649 ↗
23. MATAS S. J. · Trans. AIME · 1961 · 221 · 179
24. 10.1007/BF0281490810.1007/BF02814908 ↗
25. DORAZIL E. D. · Arch. Eisenhiittenwes., · 1979 · 50 · 293
26. 10.1007/BF0264243910.1007/BF02642439 ↗
27. 10.1007/BF0265830910.1007/BF02658309 ↗
28. 10.1179/03063458379042060010.1179/030634583790420600 ↗
29. 10.1179/03063458379042064610.1179/030634583790420646 ↗
30. 10.1179/mst.1987.3.6.42210.1179/mst.1987.3.6.422 ↗
31. C. NAKAO, K. TSUZAKI, and T. MAKI: ‘Current advances in materials and processes’, Report of the Iron and Steel Institute of Japan Meeting, Sendai, Japan, 1990, p. 1799.
32. OWEN W. S. · Trans. ASM · 1954 · 46 · 812
33. F. B. PICKERING: ‘Transformation and hardenability in steels’, 109-129; 1967, Ann Arbor, MI, Climax Molybdenum.
34. 10.1016/S0036-9748(88)80105-410.1016/S0036-9748(88)80105-4 ↗
35. ANDREWS K. W. · J. Iron Steel Inst., · 1965 · 203 · 721
36. MILLER R. L. · Trans. ASM · 1964 · 57 · 892
37. MILLER R. L. · Trans. ASM · 1968 · 61 · 592
38. MORROW and G. TITHER · J. Met., · 1978 · 16 · 8
39. COLDREN A. P. · J. Met., · 1980 · 41 · 8