journal article·2015-04

Ultrafine ferrite formation through cold-rolling and annealing of low-carbon dual-phase steel

Y. Okitsu, N. Takata, N. Tsuji

Materials Science and Technology· Volume 31· Issue 6
Publisher page

Abstract

Formation process of ultrafine grained ferrite through a simple thermomechanical route composed of cold-rolling and annealing of dual-phase starting microstructures was investigated. A 0·1C steel having a ferrite–martensite dual-phase microstructure was cold-rolled by 91 and subsequently annealed below the eutectoid (A1) temperature. During the annealing, the cold-rolled microstructure gradually changed to be equiaxed ultrafine ferrite, without preferential growth of particular ferrite grains. Hardness of the cold-rolled specimen continuously decreased without a significant drop. The main components of texture in the cold-rolled specimen, α-fibre and γ-fibre, did not change greatly after the formation of ultrafine grains. It was suggested that finely subdivided region having large misorientations in the cold-rolled state grew with recovery to form the ultrafine ferrite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Automobile R&D Center, Honda R&D Co., Ltd, 4930 Shimotakanezawa, Haga-machi, Haga-gun, Tochigi 321-3393, Japan

Department of Metallurgy and Ceramics Science, Graduate School of Science and Engineering, Tokyo Institute of Technology, 2-12-1-S8-8, Ookayama, Meguro-ku, Tokyo 152-8552, Japan

Department of Materials Science and Engineering, Graduate School of Engineering, Kyoto University Elements Strategy Initiative for Structural Materials (ESISM), Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto 606-8501, Japan

References (33)

Show source-provided references
1. World Steel Association: ‘Advanced High Strength Steel (AHSS) Application Guidelines Version 5.0’, Brussels, Belgium, 2014, available at: http://www.worldautosteel.org (accessed 27 May 2014).
2. 10.1007/s11837-008-0160-610.1007/s11837-008-0160-6 ↗
3. 10.1007/978-1-84882-454-6_1110.1007/978-1-84882-454-6_11 ↗
4. 10.1016/S1359-6462(02)00282-810.1016/S1359-6462(02)00282-8 ↗
5. 10.1016/j.msea.2007.11.04710.1016/j.msea.2007.11.047 ↗
6. 10.1007/s10853-008-2971-910.1007/s10853-008-2971-9 ↗
7. 10.1016/j.scriptamat.2011.01.02610.1016/j.scriptamat.2011.01.026 ↗
8. 10.2320/matertrans.MA20132310.2320/matertrans.MA201323 ↗
9. 10.2320/matertrans.45.227210.2320/matertrans.45.2272 ↗
10. 10.1016/j.scriptamat.2011.02.00210.1016/j.scriptamat.2011.02.002 ↗
11. 10.1016/0921-5093(95)09705-810.1016/0921-5093(95)09705-8 ↗
12. 10.1016/0921-5093(93)90717-S10.1016/0921-5093(93)90717-S ↗
13. 10.2320/matertrans.MD20082210.2320/matertrans.MD200822 ↗
14. 10.1016/S1359-6462(98)00302-910.1016/S1359-6462(98)00302-9 ↗
15. 10.1016/S1359-6462(99)00015-910.1016/S1359-6462(99)00015-9 ↗
16. 10.1016/S1359-6454(98)00365-610.1016/S1359-6454(98)00365-6 ↗
17. 10.1002/adem.20100001810.1002/adem.201000018 ↗
18. 10.1016/j.scriptamat.2008.09.00210.1016/j.scriptamat.2008.09.002 ↗
19. 10.1016/S1359-6454(02)00260-410.1016/S1359-6454(02)00260-4 ↗
20. 10.1016/S1359-6462(01)01243-X10.1016/S1359-6462(01)01243-X ↗
21. 10.2355/isijinternational.44.106310.2355/isijinternational.44.1063 ↗
22. 10.1016/j.actamat.2004.10.05110.1016/j.actamat.2004.10.051 ↗
23. Okitsu Y: ‘Fabrication of ultrafine grained steels without severe plastic deformation and their application to automobile body structures’, PhD thesis, Kyoto University, Kyoto, Japan, 2012, 50–66.
24. 10.2355/isijinternational.34.110.2355/isijinternational.34.1 ↗
25. 10.1179/imtr.1984.29.1.2510.1179/imtr.1984.29.1.25 ↗
26. 10.1179/imr.1994.39.4.12910.1179/imr.1994.39.4.129 ↗
27. 10.1098/rsta.1999.038410.1098/rsta.1999.0384 ↗
28. 10.1016/j.actamat.2007.07.00210.1016/j.actamat.2007.07.002 ↗
29. 10.1016/B978-008044164-1/50011-610.1016/B978-008044164-1/50011-6 ↗
30. Kamikawa N, Tsuji YSaito and Minamino Y: ‘Effect of strain on microstructure, texture and mechanical properties of ARB processed and annealed IF steel’, Int. Forum for the Properties and Application of IF steels (IF STEELS 2003), Tokyo, Japan, May 2003, ISIJ, 389–392.
31. 10.1016/j.scriptamat.2007.08.03510.1016/j.scriptamat.2007.08.035 ↗
32. 10.1038/nature0113310.1038/nature01133 ↗
33. 10.1016/j.msea.2010.01.07210.1016/j.msea.2010.01.072 ↗