journal article·2007-08

Study on performance of uncoated and coated tools in milling of Al–4%Cu/B4C metal matrix composites

M. Übeyli, M. S. Karakaş, A. Acır, B. Ögel

Materials Science and Technology· Volume 23· Issue 8
Publisher page

Abstract

This paper studies the performance of uncoated and multiple coated tools in milling of Al–4%Cu/B4Cp metal matrix composites (MMCs). Effect of cutting speed on the wear behaviour of tools and tool wear mechanisms were investigated. The milling operations were carried out at five different cutting speeds (100, 130, 169, 220 and 286 m min−1) by keeping the feedrate constant (0·15 mm z−1). In addition, flank wear limit value, VB=0·3 mm was selected as reference value to determine and compare wear of the tools investigated. After milling experiments, an optical microscope was used to measure the magnitude of flank wear on the tools, whereas scanning electron microscope (SEM) was utilised to examine wear mechanisms. According to experimental results, the multiple coated tool showed better performance than uncoated one at all cutting speeds and flank wear that changed with cutting speeds significantly was found as the main wear mechanism for both tools.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Koczak M. J., Khatri S. C., Allison J. E., and Bader M. G.: in ‘Fundamentals of metal-matrix composites’, (ed. Suresh S.); 1993, New York, Butterworth-Heinemann.
2. 10.1016/0924-0136(94)90159-710.1016/0924-0136(94)90159-7 ↗
3. 10.1016/0924-0136(95)01908-110.1016/0924-0136(95)01908-1 ↗
4. Ramrattan S., Sitkins F., and Nallakatala M.: Proc. Canadian Soc. Mech. Eng. Symp., Hamilton, ON, Canada, May 1996, McMaster University,624–629.
5. 10.1016/S0924-0136(98)00054-510.1016/S0924-0136(98)00054-5 ↗
6. 10.1016/j.matdes.2003.09.01910.1016/j.matdes.2003.09.019 ↗
7. 10.1016/j.surfcoat.2005.01.04810.1016/j.surfcoat.2005.01.048 ↗
8. 10.1016/S0924-0136(02)00431-410.1016/S0924-0136(02)00431-4 ↗
9. 10.1016/S0924-0136(00)00425-810.1016/S0924-0136(00)00425-8 ↗
10. 10.1016/S0257-8972(03)00802-810.1016/S0257-8972(03)00802-8 ↗
11. 10.1016/S0924-0136(98)00444-010.1016/S0924-0136(98)00444-0 ↗
12. 10.1016/j.wear.2004.07.00510.1016/j.wear.2004.07.005 ↗
13. 10.1016/S0924-0136(00)00857-810.1016/S0924-0136(00)00857-8 ↗
14. 10.1016/S0924-0136(02)00467-310.1016/S0924-0136(02)00467-3 ↗
15. 10.1016/S0007-8506(07)61151-210.1016/S0007-8506(07)61151-2 ↗
16. Cronjager L., and Meister D.: Proc. 2nd Eur. Conf. on ‘Advanced materials and processes’, Cambridge, UK, 1992, The Institute of Materials,Vol. 2, 73–80.
17. Sur G. ‘Machinability and production of aluminum alloy composites’, Master's dissertation, Institute of Science and Technology of Gazi University, Ankara, Turkey, January 2002.
18. 10.1016/S0924-0136(98)00379-310.1016/S0924-0136(98)00379-3 ↗
19. 10.1016/S0924-0136(99)00405-710.1016/S0924-0136(99)00405-7 ↗
20. 10.1016/0043-1648(85)90243-110.1016/0043-1648(85)90243-1 ↗
21. 10.1016/S0007-8506(07)62400-710.1016/S0007-8506(07)62400-7 ↗
22. Coelho R. T., Yamada S., IeRoux T., Aspinwall D. K., and Wise M. L. H: Proc. 30th MATADOR, Manchester, UK, April 1993, UMIST,125–133.10.1007/978-1-349-13255-3_17 ↗
23. 10.1016/S0007-8506(07)61153-610.1016/S0007-8506(07)61153-6 ↗
24. Lane C.: Proc. Int. Conf. on ‘Fabrication of particulates reinforced metal composites, Montreal, Canada, September 1990, ASM International,195–201.
25. Lane C. T. ‘The effect of different reinforcement on PCD tool life for aluminium composites’, Proc. ASM/TMS Mater. Week Symp., Chicago, IL, USA, November 1992, ASM/TMS,17–27.
26. Chandrasekaran H. · Proc. 2nd Int. Conf. on ‘Machining of advanced materials’, Aachen, Germany, October 1996, VDI Berichte · 1276 · 463
27. 10.1016/S0007-8506(07)62401-910.1016/S0007-8506(07)62401-9 ↗
28. Tonshoff H. K. · CIRP · 1994 · 43 · 8910.1016/S0007-8506(07)62171-4 ↗
29. Altinta Y. ‘Manufacturing automation’; 2000, Cambridge, Cambridge University Press.