journal article·2009-08

Surface oxidation of carbon fibre on tribological properties of PEEK composites

J. Li, X. H. Sheng

Materials Science and Technology· Volume 25· Issue 8
Publisher page

Abstract

In this work, ozone modification method and air oxidation were used for the surface treatment of polyacrylonitrile (PAN) based carbon fibre. The surface characteristics of carbon fibres were characterised by X-ray photoelectron spectroscopy. The interfacial properties of carbon fibre reinforced PEEK (CF/PEEK) composites were investigated by means of the single fibre pull-out tests. As a result, it was found that IFSS values of the composites with ozone treated carbon fibre are increased by 60% compared with that without treatment. X-ray photoelectron spectroscopy results show that ozone treatment increases the amount of carboxyl groups on carbon fibre surface, thus the interfacial adhesion between carbon fibre and PEEK matrix is effectively promoted. The effect of surface treatment of carbon fibres on the tribological properties of CF/PEEK composites was comparatively investigated. Experimental results revealed that surface treatment can effectively improve the interfacial adhesion between carbon fibre and PEEK matrix. Thus the wear resistance was significantly improved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical & Electronic EngineeringShanghai Second Polytechnic University, Shanghai 201209, China

Shanghai zhuzong companyShanghai 200032, China;, Email: shengxiaohong2@sina.com

References (19)

Show source-provided references
1. 10.1016/j.wear.2005.03.01710.1016/j.wear.2005.03.017 ↗
2. 10.1016/j.surfcoat.2004.12.02610.1016/j.surfcoat.2004.12.026 ↗
3. 10.1016/0043-1648(96)80012-310.1016/0043-1648(96)80012-3 ↗
4. 10.1016/j.compscitech.2005.05.02810.1016/j.compscitech.2005.05.028 ↗
5. 10.1023/A:100479131397910.1023/A:1004791313979 ↗
6. Wilson M. A., Patney H. K., and Kalman J.: Fuel, 2002, 81, 5.10.1016/S0016-2361(00)00192-7 ↗
7. Katsumata M. · Proc. SPE-Int. Soc. Opt. Eng · 1993 · 140 · 8
8. 10.1016/0008-6223(80)90029-910.1016/0008-6223(80)90029-9 ↗
9. 10.1016/0368-2048(95)02529-410.1016/0368-2048(95)02529-4 ↗
10. 10.1016/S0266-3538(96)00153-410.1016/S0266-3538(96)00153-4 ↗
11. 10.1006/jcis.1995.109310.1006/jcis.1995.1093 ↗
12. 10.1016/S0008-6223(99)00047-010.1016/S0008-6223(99)00047-0 ↗
13. 10.1016/S0008-6223(03)00177-510.1016/S0008-6223(03)00177-5 ↗
14. Fieldly A., Olsen T., Rysjedal J. H., and Berg J. E.: Compos., Part A, 2001, 32, 373.10.1016/S1359-835X(00)00056-7 ↗
15. 10.1016/S0266-3538(99)00039-110.1016/S0266-3538(99)00039-1 ↗
16. Yang Y. G. · Carbon Technol. (China) · 1997 · 6 · 12
17. 10.1016/0010-4361(94)P3628-E10.1016/0010-4361(94)P3628-E ↗
18. 10.1016/S0008-6223(97)00057-210.1016/S0008-6223(97)00057-2 ↗
19. 10.1016/S0266-3538(01)00222-610.1016/S0266-3538(01)00222-6 ↗