journal article·2007-02

Influence of counter gravity mould filling on the reproducibility of mechanical properties of a low alloy steel

W. D. Griffiths, M. Cox, J. Campbell, G. Scholl

Materials Science and Technology· Volume 23· Issue 2
Publisher page

Abstract

An evaluation of the effect of counter gravity filling of investment castings on the reproducibility of mechanical properties has been carried out for a low alloy steel. Two types of gravity filled moulds, (reflecting ‘bad’ running system design practice and ‘good’ practice), and four types of counter gravity filled moulds were cast and their mechanical properties assessed by tensile testing. The Weibull moduli of the results were determined as a measure of reproducibility of the mechanical properties associated with the different casting processes. The results showed that the counter gravity filling method produced higher values of the Weibull modulus than gravity filled methods, even with well designed running systems. This clearly demonstrated the value of a mould filling approach that avoided entrainment of the surface of the cast steel. The highest value of the Weibull modulus (>186), was associated with the ‘ C 3 process’, in which the mould was rotated during solidification.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Materials Engineering and Processing · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Campbell J.: ‘Castings’ 1st edn; 1991 London Butterworth-Heinemann.
2. Cox M., , Harding R. A., and Campbell J.: J. Mater. Set, 2003, 19, 613–625.
3. Nyahumwa C. Green N. R. and Campbell J.: AFS Trans. 1998 106 215–223.
4. Byczynski G.: ‘The strength and fatigue performance of 319 aluminium alloy castings’, PhD thesis, University of Birmingham, Birmingham, UK, 2002.
5. Honeycombe R. W. K. and Bhadeshia H. K. D. H.; ‘Steels: microstructure and properties’ 2nd edn; 1995 London Edward Arnold.
6. Kiessling R.: Non-metallic inclusions in steel'; 1976 London The Institute of Materials.
7. ‘Countergravity casting using particulate supported investment casting molds’ US patent 5069271 1991.
8. ‘Centrifugal countergravity casting’ US patent 6499529 2002.
9. 10.1007/BF0240266910.1007/BF02402669 ↗
10. 10.1179/136404606X15388510.1179/136404606X153885 ↗