journal article·1992-02

Structural and mechanical aspects of high temperature deformation of polycrystalline nickel

S. Wierzbinski, A. Korbel, J. J. Jonas

Publisher page

Abstract

The mechanisms of dynamic recrystallisation of nickel have been analysed by carrying out compression tests over a wide range of temperatures and strain rates and by examining the microstructures using optical and transmission electron microscopy. Under all deformation conditions, the true stress–true strain (σ–ɛ) curves display a typical maximum corresponding to dynamic recrystallisation, followed by a steady state flow. A correlation is shown to exist between the global strain hardening rate during high temperature straining (region of dynamic recrystallisation) and the microstructural features. Before the flow stress peak, commonly assumed to be the result of dynamic recrystallisation, two stages of strain hardening are observed, corresponding to a homogeneous (the higher hardening rate) and a heterogeneous mode of deformation, respectively. It is demonstrated that observable strain localisation takes place through the conversion of deformation bands from micro- to macrodimensions, a process which results in the global softening of nickel at high temperatures. This process leads to the formation and migration of recrystallisation fronts within periodically passive bands of localised deformation. MST/1494
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. LUTON M. J. and SELLARS C. M.: Acta Metall. 1969 17 1033–1043.10.1016/0001-6160(69)90049-2 ↗
2. 10.1179/msc.1974.8.1.32510.1179/msc.1974.8.1.325 ↗
3. SELLARS C. M.: Bull. Acad. Mining Metall. Metall. Foundry Practice, 1979, 5, 377–404.
4. SAKAI T. and JONAS J. J.: in Proc. 7th Riso Int. Symp. On ‘Metallurgy and Material Science’ 143-165; 1986 Roskilde Denmark Riso National Laboratory.
5. SAKAI T. and JONAS J. J.: Acta Metall. 1984 32 198–209.10.1080/00207148408416010 ↗
6. 10.1179/msc.1974.8.1.16110.1179/msc.1974.8.1.161 ↗
7. SANDSTROM R. and LANGEBORG R.: Acta Metall. 1975 23 387–398.10.1016/0001-6160(75)90132-7 ↗
8. 10.1179/mst.1986.2.7.65910.1179/mst.1986.2.7.659 ↗
9. JONAS J. J. and LUTON M. J.: in Proc. 21st Sagamore Conf. on. ‘Advances in deformation processing’ (ed. Burke J. J. and Weiss V. Chap. 7 215–243; 1976 New York Plenum Press.
10. MCQUEEN H. J. and JONAS J. J.: ‘Treatise on Materials Science and Technology Plastic Deformation of Materials’ (ed. Arsenault R. J.) Vol. 6 393-493; 1975 New York Academic Press.10.1016/B978-0-12-341806-7.50014-3 ↗
11. 10.1179/mtlr.1969.14.1.110.1179/mtlr.1969.14.1.1 ↗
12. 10.1179/03063458379042044810.1179/030634583790420448 ↗
13. 10.1179/03063458479042017710.1179/030634584790420177 ↗
14. KORBEL A.: Arch. Metall., 1990, 35, 177–203.
15. BOCHNIAK w.: Bull. Acad. Mining Metall. Metall. Foundry Practice, 1989, 122, 1–52.
16. BOCHNIAK W. KORBEL A. and WIERZBINSKI S.: in Proc. Int. Conf. on ‘Recrystallisation ‘90’ (ed. Chandra T. 781-788 1990 Warrendale PA TMS.
17. ESSMANN U. RAPP M. and WILICENS M.: Acta Metall. 1968 16 1275–1287.10.1016/0001-6160(68)90008-4 ↗
18. LUTON M. J. and JONAS J. J. : in Proc. 2nd Int. Conf. on ‘Strength of metals and alloys’ 1100–1105; 1970 Cleveland (now Materials Park) OH ASM.
19. IMMARIGEON J. P. A. and JONAS J. J.: Acta Metall. 1974 22 1235–1247.10.1016/0001-6160(74)90137-0 ↗
20. DRURY M. R. and HUMPHREYS F. J.: Acta Metall. 1986 34 2259–2271.10.1016/0001-6160(86)90171-9 ↗
21. 10.1016/0001-6160(86)90170-710.1016/0001-6160(86)90170-7 ↗