journal article·2006-12

Tensile fracture behaviour of microstructurally engineered Cu bearing high strength low alloy steel

S. K. Das, S. Chatterjee, S. Tarafder

Materials Science and Technology· Volume 22· Issue 12
Publisher page

Abstract

An attempt has been made to highlight the influence of precipitation and microstructural constituents on tensile fracture behaviour in Cu bearing HSLA 100 steel. Variations in the microconstituents have been incorporated in the steel by engineering the microstructures through thermal treatments consisting of solutionising, water quenching and aging at various temperatures. The microstructure in quenched condition consists of mainly lath martensite, bainite and acicular ferrite besides little amount of retained austenite, carbides and carbonitrides. Aging up to 500°C facilitated fine coherent ϵ-Cu precipitation that lost its coherency at >550°C. Simultaneously, recovery and recrystallisation of martensite and acicular ferrite occurred at higher temperatures. The formation of new martensite islands occurred on aging at >650°C. Carbides, carbonitrides and retained austenite remained essentially unchanged. Tensile tests were conducted at a slow strain rate to study the tensile fracture behaviour of the steel. Microstructural and fractographic evidences indicating that coherent Cu precipitate causes the brittleness in the material in initial stages of aging whereas loss of coherency of Cu precipitate in later stages results in the reappearance of ductility in the material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Pickering I. F. B.: Proc. Int. Symp. Microalloying ‘75: ‘High strength low alloy steels’, Washington DC, USA, October 1975, Union Carbide Corporation, 9.
2. Garcia C. I., and DeArdo A. J.: Proc. Cong. on ‘Microalloyed HSLA steels’, Chicago, IL, USA, September 1988, ASM International, 291.
3. Long C. H., and Adans R. R. ‘Copper as an alloying element in steel and cast iron’; 1948, New York, McGraw-Hill Book.
4. Granze R. A. · Trans. ASM · 1959 · 51 · 372
5. Czyryca E. J.: Key Eng. Mater., 1993, 84-85, 491.10.4028/www.scientific.net/KEM.84-85.491 ↗
6. 10.1361/10599499877034798110.1361/105994998770347981 ↗
7. Irvine K. J. · JISI · 1983 · 201 · 944
8. 10.1007/s11661-002-0245-810.1007/s11661-002-0245-8 ↗
9. Hornbogen E. · Trans. Am. Soc. Met · 1964 · 57 · 120
10. 10.1016/0001-6160(72)90091-010.1016/0001-6160(72)90091-0 ↗
11. 10.1007/BF0264385410.1007/BF02643854 ↗
12. 10.2355/isijinternational.36.32410.2355/isijinternational.36.324 ↗
13. 10.1007/BF0264981610.1007/BF02649816 ↗
14. Lyman T.: in ‘Metals handbook’, 8th edn, ‘Metallography, structure and phase diagrams’, 273; 1973, Metals Park, OH, ASM.
15. Okada H., Sekino S., Hossoi Y., and Murata T.: in ‘Copper in iron and steel’, (ed. LeeMay I., and Schetky L. M.), 83; 1982, New York, John Wiley and Sons.
16. Ghosh A., Mishra B., Das S., and Chatterjee S.: Mater. Sci. Eng. A, 2005, A396, 330.
17. 10.1179/mst.1991.7.2.13710.1179/mst.1991.7.2.137 ↗
18. Hornbogen E. · Trans. Metall Soc. AIME · 1960 · 218 · 1064
19. 10.2355/isijinternational.34.35910.2355/isijinternational.34.359 ↗
20. 10.1007/BF0266937610.1007/BF02669376 ↗
21. Anderson T. L. ‘Fracture mechanics—fundamentals and applica-tions’, 2nd edn, 265; 1995, Boca Raton, New York, CRC Press.