Hot corrosion site environment in gas turbines
Source abstract
Abstract
The importance and complexity of environmental influences on the hot corrosion process in gas turbines is now recognized. The present paper seeks to emphasize that the hot corrosion phenomenon is the end product of a chain of events which starts at the air / sea interface (encompassing wind speed, relative humidity, intake siting, etc) and which extends through filter performance, compressor operating characteristics, and flame tube design before terminating at the hot corrosion site, i.e. the high-pressure rotors. Attention is particularly drawn to the influence exerted by both salt and carbon particulate material and their interrelationship with each engine stage upstream of the turbine.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Turbomachinery Performance and Optimization · Advanced Aircraft Design and Technologies · Refrigeration and Air Conditioning Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. C. E. Junge: ‘Air chemistry and radioactivity’, 162; 1963, New York, Academic Press.
2. R. F. Lovett: MSc thesis, Heriot-Watt University, 1975.
3. R. E. Ruskin, R. K. Jack, and H. E. Gerber: Progress Report on ‘Sea salt measurement’, NRL Memo Report 3270, American Naval Research Laboratory, Washington, DC, 1976.
4. C. Frazier, R. Ruskin, L. Radke, E. Mihalek, K. Phillips, H. Ozarko, and D. Taylor: in Proc. 3rd US/UK Navy Conf. on ‘Gas turbine materials in a marine environment’, University of Bath, Sept. 1976, Session II, Paper 3.
5. R. E. Kaufman and R. J. Pollini: in Proc. Conf. on ‘Gas turbines’, Houston, Tex., 1967, ASME, Paper 67-GT-44.
6. ‘Code of practice for gas turbine intakes and exhausts’, DG Ships/522 03/25/215 Report JB/JLN/RM, NGTE, Naval Marine Wing, Pyestock, Hants, 1973.
7. E. Bradshaw: in Proc. Conf. on ‘Gas turbine inlet and exhaust systems’, London Press Centre, Nov. 1975, Institute of Marine Engineers Conference.
8. C. G. McCreath: ‘The role of the transfer ducting and compressor in the hot corrosion mechanism of gas turbine operated in a marine environment’, Department of Chemical Engineering Internal Report, University of Sheffield, 1980.
9. A. Hunt and N. C. Randle: ‘The trajectories of spherical particles in flow through cascades of vanes’, Report no. 220, Department of Aeronautical Engineering, The. University of Bristol, 1978.
10. J. A. C. Samms and D. G. Warrilow: ‘Salt aerosol sampling test on an AEI G6 gas turbine’, BCURA Contract report no. 4/C/104/1, British Coal Utilisation Research Association, 1971.
11. C. G. McCreath: in Proc. 3rd US/UK Navy Conf. on ‘Gas turbine materials in a marine environment’, University of Bath, Sept. 1976, Session V, Paper 2.
12. C. G. McCreath: in Proc. 4th US/UK Navy Conf. on ‘Gas turbine materials in a marine environment’, US Naval Academy, Annapolis, Md, June 1979, Session IV, Paper 1.
13. F. J. Kohl, C. A. Stearns, and C. G. Fryburg: in Proc. 4th US/UK Navy Conf. on ‘Gas turbine materials in a marine environment’, US Naval Academy, Annapolis, Md, June 1979, Session X, Paper X.
14. P. Bolton and R. N. Jackson: in Proc. 3rd US/UK Navy Conf. on ‘Gas turbine materials in a marine environment’, University of Bath, Sept. 1976, Session II, Paper 4.
15. M. T. Jacques, J. B. Jordan, and A. Williams: in Proc. 2nd European Symp. on ‘Combustion’, Orleans, Sept. 1975, The Combustion Institute, Paper N68.
16. C. G. McCreath and N. A. Chigier: in Proc. 14th Int. Symp. on ‘Combustion’, Pittsburgh, Pa, Sept. 1973, The Combustion ,Institute, p. 1355.
17. D. W. McKee and A. Romeo: in Proc. 2nd US/UK Navy Conf. on ‘Gas turbine materials in a marine environment’, Castine, Maine, July 1974, Session II, Paper 5.
18. J. E. Restall: in Proc. 2nd US/UK Navy Conf. on ‘Gas turbine materials in a marine environment’, Castine, Maine, 1974, Session II, Paper 6.
19. J. F. Conde, N. Birks, M. G. Hocking, and V. Vasantasree: in Proc. 4th US/UK Navy Conf. on ‘Gas turbine materials in a marine environment’, US Naval Academy, Annapolis, Md, June 1979, Session IV, Paper 3.
20. J. F. Conde, G. C. Booth, A. F. Taylor, and C. G. McCreath: COST 50 Conference on ‘High temperature alloys for gas turbines’, Liege, May 1982.
21. D. Grinnell: Rolls-Royce (Ansty) Internal Report LF80/111, 1980.
22. D. J. Stephenson, J. R. Nicholls, and P. Hancock: in Proc. 6th Int. Conf. on ‘Erosion by liquid and solid impact’, Cambridge, Sept. 1983, The Institute of Mechanical Engineers.