Micromechanism of improvement in crack initiation and propagation toughness of a Ti–Al–Sn–Zr–Mo alloy by coarsening prior β-grains
Source abstract
Abstract
Instrumented Charpy V impact tests and static and dynamic fracture toughness tests were carried out on Ti–6Al–2Sn–4Zr–6Mo alloys in which the prior β-grain size was varied by heat treatment. The effect of microstructure on the toughness was then examined. With increasing prior β-grain size, the elongation, crack initiation, and particularly propagation toughness increased and the strength decreased slightly. The increase in crack initiation toughness was caused mainly by the increase in Widmanstätten α-lath size or spacing, while the increase in crack propagation toughness was caused by the deflection of the crack propagation path, which was brought about by the decrease in intersubcolony spacing. The intersubcolony spacing decreased with increasing number of ‘diffusion controlled’ Widmanstätten α nucleating sites, which were introduced by the deformation strain.MST/786
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. 10.1007/BF0264838910.1007/BF02648389 ↗
2. A. GYSLER and G. LÜTJERING: ‘Titanium science and technology’ (Proc. 5th Int. Conf. on ‘Titanium'), (ed. G. Liitjering et al.), 2001-2008; 1985, Oberursel, Deutsche Gesellschaft für Metallkunde.
3. 10.1007/BF0266181210.1007/BF02661812 ↗
4. PETERS M. · EPRI Report CS-2933, Electric Power Research Institute, Palo Alto, CA, 1983
5. M. F. AMATEAU, W. D. HANNA, and E. G. KENDALL: in ‘Mechanical behaviour’ (Conf. Proc.), 77; 1972, Tokyo, The Society of Material Science.
6. THOMPSON A. W. · Preprint no. SC-P.76-14I, Rockwell International Science Center, Thousanek Oaks, CA, Sept. 1976
7. 10.1007/BF0264404610.1007/BF02644046 ↗
8. YOSHIKAWA K. · Jpn · 1982 · 31 · 265
9. KAWABE Y. · J. Iron Steel Inst. Jpn · 1983 · 69 · 14510.2355/tetsutohagane1955.69.1_145 ↗
10. KISH' T. · J. Iron Steel Inst. Jpn · 1986 · 72 · 12310.2355/tetsutohagane1955.72.1_123 ↗
11. NIINOMI M. · J. Iron Steel Inst. Jpn · 1987 · 73 · 139710.2355/tetsutohagane1955.73.10_1397 ↗
12. 10.1016/0025-5416(88)90238-810.1016/0025-5416(88)90238-8 ↗
13. 10.1016/0013-7944(84)90068-710.1016/0013-7944(84)90068-7 ↗
14. 10.1016/0013-7944(86)90249-310.1016/0013-7944(86)90249-3 ↗
15. REISH W. A. · Met. Frog. · 1982 · 110 · 51
16. 10.1007/BF0265833910.1007/BF02658339 ↗
17. 10.1016/0025-5416(86)90356-310.1016/0025-5416(86)90356-3 ↗
18. KUSAMICHI H. · J. Iron Steel Inst. Jpn · 1983 · 69 · 121510.2355/tetsutohagane1955.69.10_1215 ↗
19. 10.1007/BF0281605010.1007/BF02816050 ↗
20. KOBAYASHI T. · J. Jpn Inst. Met. · 1982 · 46 · 43310.2320/jinstmet1952.46.4_433 ↗
21. 10.1115/1.360120610.1115/1.3601206 ↗
22. J. R. RICE and D. M. TRACEY: in ‘Numerical and computer methods in structural mechanics’, (ed. S. J. Feneves et al.), 585; 1973, London/New York, Academic Press.10.1016/B978-0-12-253250-4.50031-2 ↗
23. DUEIUG T. W. · Metall. Trans. · 1980 · 11 · 198710.1007/BF02655118 ↗