journal article·1994-03

Effects of heat treatment on microstructure and mechanical properties of Cr–Mo–3·5Ni–V steel

N. Ridley, S. Maropoulos, J. D. H. Paul

Materials Science and Technology· Volume 10· Issue 3
Publisher page

Abstract

Heat treatments have been carried out on an annealed low alloy Cr–Mo–3·5Ni–V steel (J-steel) to investigate the effects of various normalising and hardening temperatures, before tempering, on the mechanical properties. It was observed that the 0·2% proof stress increased, whereas the impact toughness, as measured by the increase in transition temperature, decreased with increasing hardening temperature for both normalised and non-normalised material. For a constant hardening temperature, the 0·2% proof stress passed through a minimum and the Charpy upper shelf energy passed through a maximum, at a normalising temperature of 890°C. The variation in properties has been correlated with the observed variation in martensite packet size, dislocation density, precipitate size, and volume fraction. It was found that a 0·2% proof stress above 1100 MN m−2, and a Charpy impact energy of greater than 50 J at −40°C located within the upper shelf energy region, was attainable with the following heat treatment: normalising from 870°C and hardening from 850°C, followed by tempering at 620°C and oil quenching to room temperature.MST/1870
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. WADA T. · Metall. Trans. · 1974 · 5 · 23110.1007/BF02642946 ↗
2. 10.1179/mt.1978.5.1.4510.1179/mt.1978.5.1.45 ↗
3. 10.1007/BF0265992610.1007/BF02659926 ↗
4. ASHBY M. F. · Trans. AIME · 1966 · 236 · 1397
5. P. B. HIRSCH, A. HOWIE, R. B. NICHOLSON, D .W. PASHLEY, and M. J. WHELAN (eds.): 'Electron microscopy of thin crystals'; 1965, London, Butterworths.
6. T. N. BAKER: 'Yield, flow and fracture of polycrystals', (ed. T. N. Baker), 235–273; 1983, London, Applied Science.
7. SPEICH G. R. · Trans. AIME · 1969 · 245 · 2553
8. 10.1007/BF0264302410.1007/BF02643024 ↗
9. 10.1016/0502-8205(59)90015-210.1016/0502-8205(59)90015-2 ↗
10. 10.1063/1.171291510.1063/1.1712915 ↗
11. 10.1088/0370-1298/62/11/11010.1088/0370-1298/62/11/110 ↗
12. 10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
13. H. P. KLUG and L. E. ALEXANDER: ‘X-ray diffraction procedures'; 1954, New York, Wiley.
14. 10.1080/1478643560823807410.1080/14786435608238074 ↗
15. J. H. WOODHEAD: 'Vanadium in high strength steels', 3–6; 1979, London, Vanitec.
16. BANERJEE B. R. · J. Iron Steel Inst. · 1965 · 203 · 166
17. HOBBS R. M. · PhD thesis · 1972
18. HALE K. F. · J. Iron Steel Inst. · 1963 · 201 · 337
19. COX A. R. · Trans. Jpn Inst. Met. · 1968 · 9 · 118
20. L. F. PORTER and D.S. DABKOWSKI: ‘Ultrafine grain metals', (ed. J. J. Burke and V. Weiss, 141–198; 1970, New York, Syracuse University Press.
21. 10.1007/BF0266263910.1007/BF02662639 ↗
22. ROBERTS M. J. · Metall. Trans. · 1970 · 1 · 328710.1007/BF03037855 ↗
23. 10.1007/BF0266194410.1007/BF02661944 ↗
24. T. GLADMAN and F.B. PICKERING: 'Yield, flow and fracture of polycrystals', (ed. T. N. Baker), 141–198; 1983, London, Applied Science.
25. HOBBS R. M. · J. Iron Steel Inst. · 1972 · 210 · 757
26. F. B. PICKERING: 'Physical metallurgy and design of steels'; 1978, London, Applied Science.
27. R. W. K. HONEYCOMBE: 'Steels, microstructure and properties'; 1981, London, Edward Arnold.
28. IRVINE K. J. · J. Iron Steel Inst. · 1960 · 194 · 137
29. 10.1016/0001-6160(66)90124-610.1016/0001-6160(66)90124-6 ↗
30. 10.1007/BF0264704110.1007/BF02647041 ↗
31. 10.1179/mst.1990.6.7.59210.1179/mst.1990.6.7.592 ↗
32. PICKERING F. B. · Int. Met. Rev. · 1976 · 21 · 227
33. WEBSTER D. · J. Iron Steel Inst. · 1962 · 200 · 520
34. 10.1179/msc.1974.8.1.16710.1179/msc.1974.8.1.167 ↗
35. BATTE A. D. · J. Iron Steel Inst. · 1973 · 211 · 284
36. 10.1179/mst.1993.9.11.101410.1179/mst.1993.9.11.1014 ↗
37. J. A. WHITEMAN: 'Low carbon steels for the eighties', Series 3, no. 6, 1–7; 1977. London, The Institution of Metallurgists.
38. 10.1179/03071697780329206010.1179/030716977803292060 ↗
39. OHTANI H. · Iron Steel Inst. Jpn · 1972 · 12 · 11810.2355/isijinternational1966.12.118 ↗