journal article·2025-05-26

Effect of tool ratio on the performance of 6061-T6 aluminum alloy refill friction stir spot welded zone

Di Jiang, Igor Kolupaev, HongFeng Wang, Xiaole Ge

Publisher page

Abstract

The refill friction stir spot welding (RFSSW) of defect-free aluminum alloy was performed using a fixed-diameter shoulder and probes of different diameters. The process parameters were set at a rotational speed of 1400 rpm and welding speeds of 30 mm/min, 40 mm/min, and 50 mm/min. The results showed that the grain size in the weld zone was refined. The joint residual line (JRL) did not affect the ultimate lap shear force (ULSF) of the weld zone. A higher “HOOK” height increased the ULSF by avoiding the load plane. As a result, the ULSF was high at different welding speeds for larger probe diameters. It was not sensitive to process parameters. However, the hardness was lower.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical and Electrical Engineering, Huangshan University, Huangshan, Anhui, China

Department of Materials Science, National Technical University «Kharkiv Polytechnic Institute», Kharkiv, Ukraine

Funding

Excellent Young Scientists Fund · Huangshan University · Anhui Provincial Department of Education

References (28)

Show source-provided references
1. 10.1016/j.vacuum.2021.11029810.1016/j.vacuum.2021.110298 ↗
2. 10.1080/01694243.2022.202807310.1080/01694243.2022.2028073 ↗
3. 10.1007/s10853-024-10095-810.1007/s10853-024-10095-8 ↗
4. 10.1016/j.jmapro.2019.05.03910.1016/j.jmapro.2019.05.039 ↗
5. 10.1080/13621718.2023.222902510.1080/13621718.2023.2229025 ↗
6. 10.1016/j.ijfatigue.2024.10830810.1016/j.ijfatigue.2024.108308 ↗
7. 10.1007/s00170-024-13336-x10.1007/s00170-024-13336-x ↗
8. 10.1016/j.jmrt.2022.11.10810.1016/j.jmrt.2022.11.108 ↗
9. 10.1016/j.engfailanal.2017.09.00910.1016/j.engfailanal.2017.09.009 ↗
10. 10.1016/j.jmapro.2019.11.02910.1016/j.jmapro.2019.11.029 ↗
11. 10.1007/s12666-016-0937-110.1007/s12666-016-0937-1 ↗
12. 10.1007/s12613-020-1998-z10.1007/s12613-020-1998-z ↗
13. 10.1515/htmp-2015-025410.1515/htmp-2015-0254 ↗
14. 10.1016/j.ijmachtools.2009.06.00110.1016/j.ijmachtools.2009.06.001 ↗
15. 10.1007/s00170-016-9398-210.1007/s00170-016-9398-2 ↗
16. 10.1007/s11665-022-07253-x10.1007/s11665-022-07253-x ↗
17. 10.1016/j.jmatprotec.2015.11.02610.1016/j.jmatprotec.2015.11.026 ↗
18. 10.1016/j.jmatprotec.2018.12.00510.1016/j.jmatprotec.2018.12.005 ↗
19. 10.1016/j.jmapro.2017.02.01910.1016/j.jmapro.2017.02.019 ↗
20. 10.1016/j.msea.2019.13872410.1016/j.msea.2019.138724 ↗
21. Wang Y, Chai P. Characteristics and tensile-shear properties of refill fssw joint under different plunge depths in 2060 aluminum alloy[J]. Arch Metall Mater 2021; 66: 451–460.
22. 10.1007/s11665-017-2929-710.1007/s11665-017-2929-7 ↗
23. 10.1016/j.jmrt.2019.07.02110.1016/j.jmrt.2019.07.021 ↗
24. 10.1007/s40195-019-00968-210.1007/s40195-019-00968-2 ↗
25. 10.1007/s12666-017-1146-210.1007/s12666-017-1146-2 ↗
26. 10.1007/s00170-023-12834-810.1007/s00170-023-12834-8 ↗
27. 10.1080/10408436.2019.167179910.1080/10408436.2019.1671799 ↗
28. 10.1080/13621718.2023.218020310.1080/13621718.2023.2180203 ↗