Dislocation-intervening carbides mechanism and its impact on the corrosion resistance of 304/Q235 composites
Source abstract
Abstract
Stainless steel clad plates are highly sought after in industries such as heavy machinery, ships, and pressure vessels. Intergranular corrosion, caused by the uphill diffusion of carbon atoms, hinders the progress of stainless steel composite plates. The controlled rolling and post-deformation of the solution-free treatment described in this paper inhibits the Segregation behavior of alloying elements, leading to increased resistance to intergranular corrosion and improved pitting corrosion ability in the 304/Q235 composites. The intergranular corrosion rate and corrosion potential of the 304/Q235 composites were 792 g/(m 2 ·h) and −473.3 mV SCE , respectively, in their original hot rolled state. The introduction of high-density dislocations before the formation of chromium-rich carbides can hinder the precipitation of carbides along grain boundaries, resulting in an 18·3% reduction in the intergranular corrosion rate of the composite plate. Cold deformation is performed following the precipitation of chromium-rich carbides, resulting in a decrease in the degree of aggregation of C, Cr, and other elements. The aforementioned process described above results in a discontinuous distribution of carbides along grain boundaries, as well as the refinement and dissolution of the precipitation phase. The intergranular corrosion rate of the deformation-treated composite plate was reduced by 79 g/(m 2 ·h) in comparison to its initial hot-rolled state. The aim of this study is to elucidate the underlying mechanism by which deformation influences the carbide precipitation behavior of stainless steel composite plates. This research provides a novel idea for the cost-effective and solution-free hot rolling preparation of stainless steel composite plates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan, People's Republic of China
References (29)
Show source-provided references
1. Lei XL, Ding WH, Hu Y, et al. Structural modification of TA2/Q355B composite interface and study of TiC stability mechanism. Mater Sci Technol 2022; 38: 1–11.
2. 10.3390/met1307127310.3390/met13071273 ↗
3. 10.1080/02670836.2022.214362210.1080/02670836.2022.2143622 ↗
4. 10.1080/02670836.2022.215928910.1080/02670836.2022.2159289 ↗
5. Hu Y, Ding WH, Ming YF, et al. Effect of carbon content and solid solution temperature on corrosion resistance and impact toughness of nickel-based alloy composite plates. Trans Mater Heat Treat 2022; 43: 36–45.
6. 10.1016/j.jmrt.2023.07.19210.1016/j.jmrt.2023.07.192 ↗
7. 10.1016/j.msea.2021.14220110.1016/j.msea.2021.142201 ↗
8. 10.1016/j.rinp.2020.10292510.1016/j.rinp.2020.102925 ↗
9. 10.1016/j.msea.2021.14157210.1016/j.msea.2021.141572 ↗
10. 10.1016/j.mtcomm.2021.10249710.1016/j.mtcomm.2021.102497 ↗
11. 10.3390/ma1323545510.3390/ma13235455 ↗
12. 10.1002/srin.20190060410.1002/srin.201900604 ↗
13. 10.1007/s40195-019-00985-110.1007/s40195-019-00985-1 ↗
14. Li H, Zhang QD, Yu MY, et al. Interface structure change and carbon diffusion of stainless steel-carbon steel-laminated composite under high-temperature condition. J Mater Eng Perform 2023; 92: 125451.
15. 10.1016/j.msea.2023.14492810.1016/j.msea.2023.144928 ↗
16. 10.1016/j.matchemphys.2018.06.03310.1016/j.matchemphys.2018.06.033 ↗
17. 10.3390/ma1613480910.3390/ma16134809 ↗
18. Wang S, Zhao GH, Li YG, et al. Effect of different reduction rates on the near-interfacial structure of pressed 304/Q235 composite plate. Mater Res Express 2020; 7: 066531.
19. 10.1016/j.jmapro.2022.11.01310.1016/j.jmapro.2022.11.013 ↗
20. 10.1080/1478643560823807410.1080/14786435608238074 ↗
21. 10.1007/s13632-015-0220-610.1007/s13632-015-0220-6 ↗
22. Wang XY, Liu PT, Zhao GH, et al. Thermal deformation behavior and interface microstructure analysis of 2205/Q345 hot compression composite. Crystals 2022; 12: 01.
23. 10.1016/j.jmatprotec.2023.11795710.1016/j.jmatprotec.2023.117957 ↗
24. 10.1016/j.msea.2013.06.01410.1016/j.msea.2013.06.014 ↗
25. 10.1016/j.actamat.2013.08.02710.1016/j.actamat.2013.08.027 ↗
26. 10.1016/j.msea.2018.04.10210.1016/j.msea.2018.04.102 ↗
27. Li H, Zhang LY, Zhang BY, et al. Microstructure characterization and mechanical properties of stainless steel clad plate. Materials 2019; 12: 09.
28. 10.1007/s10853-019-03581-x10.1007/s10853-019-03581-x ↗
29. 10.3390/met1004055210.3390/met10040552 ↗