journal article·2023-12

Microstructure and properties change in Al 5+ x Cr 12 Fe 35 Mn 28- x Ni 20 high entropy alloys

Sally Elkatatny, Atef Hamada, Huakang Bian, Akihiko Chiba, Mohamed A. H. Gepreel

Materials Science and Technology· Volume 39· Issue 18
Publisher page

Abstract

In the present study, a non-equiatomic AlCrFeMnNi high-entropy alloy (HEA) bearing cost-effective elements has been developed to enhance the strength by increasing the Al content. The HEAs were prepared by employing the arc melting technique. The microstructure of cast HEAs was studied by electron microprobe analysis (EPMA), electron backscattering diffraction (EBSD), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The mechanical properties were evaluated at room temperature. The results show that the latter duplex structure exhibited significantly higher compressive strength, 2.5 GPa at 50% strain. The measured ductility under the tensile stress of the duplex structure was considerably low. This is attributed to the various stress states in compression and tension, the phase structures, and the induced deformation mechanism in the studied HEAs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, Faculty of Engineering, Suez Canal University, Ismailia, Egypt

Kerttu Saalasti Institute, University of Oulu, Nivala, Finland

Institute for Materials Research, Tohoku University, Sendai, Japan

Materials Science and Engineering Department, Egypt-Japan University of Science and Technology (E-JUST), Alexandria, Egypt

Funding

Institute for Materials Research, Tohoku University · Ministry of Higher Education · Egyptian Ministry of Higher Education · MOHE · Egypt-Japan University of Science and Technology

References (29)

Show source-provided references
1. 10.1016/j.pmatsci.2013.10.00110.1016/j.pmatsci.2013.10.001 ↗
2. 10.1007/s11837-013-0761-610.1007/s11837-013-0761-6 ↗
3. 10.1038/ncomms752910.1038/ncomms7529 ↗
4. 10.1016/j.matdes.2016.01.14910.1016/j.matdes.2016.01.149 ↗
5. 10.1080/21663831.2014.91269010.1080/21663831.2014.912690 ↗
6. 10.1002/adem.20070024010.1002/adem.200700240 ↗
7. 10.1016/j.jallcom.2015.10.27910.1016/j.jallcom.2015.10.279 ↗
8. 10.1002/adem.20030050710.1002/adem.200300507 ↗
9. 10.1016/j.actamat.2016.08.08110.1016/j.actamat.2016.08.081 ↗
10. 10.1002/adem.20030056710.1002/adem.200300567 ↗
11. 10.1016/j.corsci.2004.09.02610.1016/j.corsci.2004.09.026 ↗
12. 10.1063/1.273451710.1063/1.2734517 ↗
13. 10.3390/e1601049410.3390/e16010494 ↗
14. 10.1016/j.msea.2003.10.25710.1016/j.msea.2003.10.257 ↗
15. 10.1016/j.actamat.2013.01.04210.1016/j.actamat.2013.01.042 ↗
16. 10.1016/j.intermet.2014.12.00410.1016/j.intermet.2014.12.004 ↗
17. 10.1016/j.jallcom.2013.12.21010.1016/j.jallcom.2013.12.210 ↗
18. 10.1016/j.jallcom.2009.08.09010.1016/j.jallcom.2009.08.090 ↗
19. 10.4028/www.scientific.net/MSF.917.24110.4028/www.scientific.net/MSF.917.241 ↗
20. 10.1016/j.msea.2019.05.05610.1016/j.msea.2019.05.056 ↗
21. 10.4028/www.scientific.net/msf.998.910.4028/www.scientific.net/msf.998.9 ↗
22. 10.1080/02670836.2022.212339810.1080/02670836.2022.2123398 ↗
23. 10.1002/adem.20030056710.1002/adem.200300567 ↗
24. 10.1016/j.actamat.2013.09.03710.1016/j.actamat.2013.09.037 ↗
25. 10.1016/j.jallcom.2017.02.21110.1016/j.jallcom.2017.02.211 ↗
26. 10.1016/0924-0136(95)01987-P10.1016/0924-0136(95)01987-P ↗
27. 10.1016/j.jmmm.2014.07.02310.1016/j.jmmm.2014.07.023 ↗
28. 10.1016/j.msea.2007.02.07410.1016/j.msea.2007.02.074 ↗
29. 10.1016/j.actamat.2015.09.04810.1016/j.actamat.2015.09.048 ↗