article·2011-01-01

Tempering structure evolution and mechanical properties of a low welding crack susceptibility steel

Linxiu Du

Abstract

To optimize the mechanical properties of a high strength low welding crack susceptibility steel,different temperature tempering tests were carried out on the hot-rolled steel plates in this study.Optical microscopy,scanning electron microscopy and transmission electron microscopy were employed to observe tempering microstructure evolution,and the relationship of tempering microstructures and corresponding mechanical properties was analyzed according to the results of mechanical properties tests.The results shows that the yield strength and tensile strength of 550 ℃ tempered specimens are increased by 115 MPa and 30 MPa,and the average impact absorbed energy is enhanced by 30 J compared with that of the hot rolled specimens.Microstructure analyses present that the specimens maintain relatively good boundary strengthening and dislocation strengthening effects.Meanwhile,that quite a number of fine precipitates disperse on dislocation lines is also an important factor to improve the strength.However,under the condition of 650 ℃ tempering,a new kind of martensite phase occurs along the boundary of prior austenite and degenerated boundary of lath bainite,and results in deterioration of toughness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.