Experimental study on autoclaved aerated concrete made from copper tailings without using lime as calcareous materials
Source abstract
Abstract
Copper tailings,blast furnace slag,eolian sand,a small amount of clinker and gypsum were used as raw materials to prepare aerated concrete(AAC).Lime was substituted by Ca and Mg rich copper tailings and blast furnace slag to reduce the CO2 emission brought by limestone calcinations.This study focused on the effect of different component of raw materials on the physical and mechanical properties of AAC.The optimal proportion of major raw materials for a B06 grade AAC is as follows:copper tailings 30%,blast furnace slag 35%,eolian sand 20%,clinker 10% and gypsum 5%.The prepared AAC sample has bulk density of 610.2 kg·m-3 and compressive strength of 4.0 MPa,which can reach the requirements of A3.5,B06 level of AAC product regulated by autoclaved aerated concrete block GB 11968—2006.Microstructure analyses show that the main crystalline phases in the AAC sample are tobermorite,anhydrite,residual quartz and residual minerals from copper tailings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.